Specifications

The Need-to-Know before Driving
- 15 -
not disassemble or modify the safety
belt system privately.
Protection of safety belt
Keep the belts always clean and dry.
Avoid safety belt being stained by
polishing compound, oil and chemicals,
especially acid fluid of battery. If the
belts need cleaning, use a mild soap
solution or lukewarm water. Never use
bleach, dye, or abrasive cleaners- they
may severely weaken the belts, result
in hidden trouble of safety. You should
avoid safety belt touching sharp
objects. Check to see if the safety belt
is damaged, at regular intervals;
replace the damaged components as
soon as possible. Over tensioned safety
belt in accident must be replaced,
Chery recommends to replace the belt
assembly, if it has been used in a
severe impact. You should check the
belt assembly to see if they need
replacing, even if they has not been
used in accident, but there is
something wrong with them.
！Notice:
Damaged safety belt will lose
protective function without
replacement. You had better inspect the
belt assembly at regular intervals.
Please contact your Chery Authorized
Service Station for seat belt inspection
and replacement, according to the
request, after a collision. Replace belt
assembly if it has been damaged,
stained or used improperly.
The entire assembly used in a severe
impact should be replaced, even if
damage is not obvious. If the safety
belt is not suitable, it may be lead to
more severe injury. Do not
disassemble or modify the safety belt
at will.
Pregnant woman
Chery suggests that the pregnant
woman should ask her doctor for
specific recommendations before using
a seat belt.
！Notice:
The pregnant woman and unborn baby
may be hurt during trip. Therefore: If
possible, please use three-point type
diagonal lapping safety belt (please
consult your doctor).