Specifications

Maintenance and Upkeep
- 117 -
oil for your vehicle engine. A certain
amount of oil is consumed while the
engine is running; therefore you
should check the engine oil level at
regular intervals. The vehicle should
be on a level ground. After turning
off the engine, and wait a few
minutes for the oil to drain back into
the oil pan. Pull out the dipstick and
wipe it clean with a cloth, then
reinsert the dipstick and push it in as
far as it will go.
Pull the dipstick out once more and
check it to see if the oil level is
between ―MIN‖ (minimum) and
―MAX‖ (maximum) level lines of the
dipstick.
You should also check the cleaness of
oil on the dipstick; replace oil if the
cleaness degree is not up to the
standard.
If the oil level is blow ―MIN‖ level
line, add engine oil in order to make
the oil level between ―MIN‖ and
―MAX‖.
The oil level should not above
―MAX‖ level line; otherwise it may
be cause malfunctions such as oil
being consumed too much; spark
plug accumulates carbon; and cooling
effect is not good (engine oil is
foaming) and engine power is not
good.
Please use oil of same specifications,
while adding the oil.
Special attention: If the oil warning
light is on, but you still let the engine
running, as a result, the engine is
damaged. This is not covered by our
quality guarantee.