User manual

Instruments and control devices
55
Engine oil pressure alarm
indicator lamp
The indicator lamp lights when the
ignition switch is turned on, and
extinguishes after the engine starts up.
If the indicator lamp lights when the
vehicle is traveling, check the level of
engine oil. If the engine is short of oil,
refill the specified engine oil to the
normal level of oil; and if the oil level is
normal, please take care to contact the
Chery Authorized Service Station.
！CAUTION
In case that the engine oil pressure alarm
indicator lamp lights for a long time, it
indicates that the engine has some one
trouble, please immediately stop your
vehicle to check whether there is short of
engine oil when the vehicle is traveling,
and, if necessary, refill the oil; if the
engine oil is normal, please get to the
nearest Chery Authorized Service Station
to have your vehicle checked.
If the engine oil pressure alarm indicator
lamp lights when the vehicle is traveling,
stop your vehicle to have it checked. In
this case, the continuous travel may
damage the engine, without the warranty.
Brake system alarm indicator
lamp
Pull up the hand brake after the ignition
switch is turned on, and then the indicator
lamp lights, and extinguishes after the
hand brake is released.
Before driving, completely release the
hand brake. If the indicator lamp still
lights after the completely releasing of
hand brake, it shows that there is short of
brake fluid. In this case, you shall:
● park your vehicle on the roadside;
● check the level of brake fluid, and, if
necessary, refill the brake fluid
specified by the CHERY company to
the MAX mark;
● immediately drive your vehicle at the
safety speed to the nearest Chery
Authorized Service Station to have it
checked if the brakes are normal and
the brake system is confirmed very
safe;
● drag your vehicle to the nearest
Chery Authorized Service Station t o
have it checked and repaired if you
find any one of the following
troubles: brake fluid leakage, the
alarm indicator lamp lights for a
long time, or the brake fails to work
normally.
！CAUTION
The brake system alarm indicator lamp
doesn’t light after the ignition switch is
turned on and the hand brake is pulled up,
it shows that the brake system may be in
trouble. Check whether the bulb has some
troubles. If the bulb is working normal,
check the brake system; if the brake fluid
alarm indicator lamp lights for a long
time, it indicates that the level of brake
fluid is low, which may make influence
on the braking performance. In this case,
if you are driving your vehicle, you shall
gradually decelerate till stop your vehicle,
and carry out the following checks:
1. check the brake fluid reservoir, and if