User manual

Notices Before Drive
27
3. Insert one end of the knighthead into
the hole beside the engine room to brace
the coping.
4. Press the knighthead into the clamp to
avoid vibration before closing the coping.
5. Lay down the coping and let it fall
from about 30cm (1 inch) height. Close
the coping and shake the edge of it to
ensure it has been locked.
！Notice
Opening the engine coping in traveling
will cause accident which would block
the front line of sight. Pull the edge of the
coping to check whether it has been
completely closed before driving. Do not
operate the engine coping unlock handle
during driving. Do not drive with the
coping lifted. If the coping is open, the
car still can be started. So before loose
the coping unlock ouch, pull off the
ignition key and set the transmission at
1-speed or back-up and pull the parking
brake. When the engine is running, open
the engine coping and the running
components bare at this time, do not wear
loose clothes or let hands and hair to
touch the running components to avoid
any unnecessary damage.