User manual

Service and Maintenance
157
！Notice
Oil stain on the finger will contaminate
bulb and result in dim lamplight. Don’t
touch halogen bulb with hand. Wash the
bulb with clean lint-free cloth with
alcohol or painter's naphtha on it.
Traveling Lamp
-Discover engine coating and erect
supporting bar.
-Cut the bunch plugging components
behind the bulb.
-Detach the back cover.
-Detach the bulb fixing holder of the
headlight.
-Directly detach the bulb from the fixing
holder.
-Fix new bulb.
-Install the bulb in reversed sequence.
Front turn signal lamp
-Take down the two fixing bolts.
-Cut the bunch plugging components
behind the bulb.
-Contra-rotate the bulb fixing holder and
detach it.
-Pull the lamp out from the fixed base.
-Fix new bulb.
-Install the bulb in reversed sequence.
Lateral turn signal lamp
-Draw backwards and detach the
components of Lateral turn signal lamp.
-Contra-rotate the bulb fixing holder and
detach it from bulb crust.
-Directly pull the bulb out of the fixing
holder.
-Fix new bulb.
-Install the bulb in reversed sequence.
Rear light, braking light,
rear turn signal lamp,
backing-up lamp and rear
fog light.
-Discover the trunk cover.
-Take down the two fixing bolts.
-Detach the fixing bolt in the rear
machine room and take down rear
assembly.
-Contra-rotate the bulb fixing holder and
detach it from bulb crust.
-Fix new bulb. -Install the bulb in reversed sequence.