User manual

Service and Maintenance
106
Service and Maintenance
Engine oil checking procedures
Ensure engine oil at specified level and
right lubrication. Inspect oil level because
oil will consume when engine runs.
Vehicle must be stopped at level surface
when checking. Wait several minutes
when checking oil level ensuring oil
return oil pan. If engine is cold, it will
take a long time for oil returning.
Checking Oil Level: remove oil dipstick
and clean with discottony cloth, then
insert dipstick to full. Remove dipstick
and inspect if oil is between MIN and
MAX scale.
Check if dipstick is dirty.
If oil level is under MIN scale, add oil to
ensure oil level reaches MAX scale. Oil
should not surpass MAX scale, otherwise
oil consumption will increase which will
foul spark park and cause carbon deposit.
When add oil, use same brand and grade
oil with previous.
！Notice
Avoid frequent touch with engine oil;
otherwise skin illness will be caused.
Clean thoroughly after touching oil. Used
oil should be kept away from children.
Inadequate and over oil will cause engine
damage. Inspect engine oil timely and
frequently. Add oil as necessary. DO
NOT over add engine oil.
SPECIAL CAUTION:
For engine damage caused by inadequate
oil, manufacturer does not effect
warranty.
Replacing engine oil and oil filter
Replace engine oil upon t ime and mileage
interval because oil may also deteriorate
with time besides engine running.
Under special conditions as frequent cold
starting and on-off switching in
municipal road surface, engine oil and oil
filter replacing interval shall shorten
accordingly (comparing with
recommended service schedule)
Replace oil filter when replace oil.