User guide

USER GUIDE Cherry Mobile D16i
User Guide
1.4 Installing/ Removing the battery
Battery Installation Notice
Always switch the device off and disconnect the charger before removing and installing the battery.
1) Installing the battery
 Remove the battery cover.
 Aim the metal terminals of the battery and then push it down until it is placed properly.
 Put the battery cover on.
2) Removing the battery
 Remove the battery cover.
 Remove it from the battery slot properly.
1.5 Charging the battery
 Plug the charger into the electrical outlet.
 Plug the charger connector into the mobile phone
 The Battery indicator icon will start flashing until charging is finished.
 When charging is complete, disconnect the charger connector from the mobile phone and
unplug the charger from the electrical outlet.
* Attention:
While charging, you can still use your phone as usual but charging time will increase.
When you are charging the mobile phone in power off state, a charging indication will appear on the
screen.
1.6 Inserting/Removing the SIM card
Note:
Always switch the device off and disconnect the charger before removing and installing the SIM Card.
 Remove the battery cover.
 Remove the battery.
 Insert/remove the SIM card.
 Insert the battery.
 Put the battery cover on.
Note:
(a) Your SIM card contains important personal data such as Phonebook, PIN (personal identification
number), PIN2, PUK (PIN Unlock Code), PUK2（PIN2 Unlock Code), network information, call history,
and SMS (Short Message) data so be careful when handling, inserting or removing the SIM card.
Bending or scratching your card may cause permanent damage to it.