User guide

USER GUIDE Cherry Mobile D12
1.46 Blacklist
This function lets you block the incoming call of the contact number you have set.
1.47 Auto redial
When this function is activated, the mobile phone will automatically redial a busy or unreachable
number.
1.48 Speed dial
Set the number corresponding to the numeric keys from 2 to 9, when this function is activated, press and
hold the numeric keys to automatically call the specific contact (only in idle state).
1.49 IP Number
The mobile phone support IP dial function and you can also edit up to three IP numbers.
1.50 Shortcut call log type
This function you can select the call type log from unified or separated, when you select unified the call
logs from SIM1 and SIM2 will be viewed as one. On the other hand when you select the Separated, you
can view the SIM1 call log and SIM2 call log separately.
1.51 More
Call time display: Switch on/off this function to display or not the call time.
Call time reminder: Allow the user to limit the duration of a call.
Auto quick end: Restricts the call time.
Troubleshooting
If problems occur when using the phone, try to find a solution here first.
Switch off your mobile phone to optimize its performance.
It is recommended to fully charge your battery to get a better performance.
Avoid storing too much data in the phone, as doing so may affect its performance.
1) Phone cannot switch on
Press and hold the end key until image appears on the display.
Check the battery charge level.
Check the battery contacts. Remove and insert the battery and switch your phone on again.
2) Phone does not respond for several minutes
Press and hold the end key.
Remove and insert the battery, and switch your phone on again.