Manualshelf

Datasheet

ManualsBrandsCHERRY SWITCHES ManualsPush Actuated Switches & ButtonsMicroswitch 250 Vac 6 A 1 x On/(On) IP67 momentary 1 pc(s)
12
www.switches-sensors.zf.com
Page 1 of 2, Last update 2017-08-10, Specifications subject to change without notice.
Sealed Subminiature Snap Switch
Single Pole
DC Series
Features
• Enclosed switch complying with IP6K7
• Models available for operating temperature up to 120
O
C
• Various contact materials available
• RoHS compliant
• Silicon-free version available
• Various aux actuators (can be retrofitted)
• Two mounting positions
• Mechanical life minimum 1,000,000 operations
• Rated for currents up to 10.1 A at 250 VAC
Standard Parts
1
DC1C-A1AA DC2C-A1AA DC3C-A1AA
DC1C-A1LB DC2C-A1LB DC3C-A1LB
DC1C-A1RB DC2C-A1RB DC3C-A1RB
1
The part number configuration matrix below provides details to the part numbers above.
For configurable part numbers that are not listed above, not listed in your region, or for custom part numbers, contact the factory or your distributor.
Part Number Breakdown
DC1C-A1AA
Series Contact Rating
2
Configuration Terminal Type millimeters (inches) Terminal Configuration
DC 1
5 Amp
120
O
C
A
Solder, short
Term config 1
only
1
30
O
twisted
2
10.1 Amp
A
SPST NO
B
0.5 (0.02) leads, no UL
105
O
C, DC3 only
3
Leads on actuator side
3
0.1 Amp
B
SPST NC
C
0.75 (0.03) leads, no UL
105
O
C only
4
Leads opposite actuator
C
SPDT
H
1.2 x 0.5 (0.05 x 0.02) PCB
Term configs 1
only
5
Leads attached to
underside
85
O
C
K
0.5 x 0.5 (0.02 x 0.02) PCB
Term configs 1,
6, 7, 9 only
6
PCB terms – right hand
side
E
SPST NO
L
2.8 x 0.5 (0.11 x 0.02) QC
Term config 1
only
7
PCB terms – left hand
side
F
SPDT NC
N
Without leads (Type B)
Term configs 3, 4
only
8
PCB terms – right hand
side w/location pins
G
SPDT
P
Without leads (Type A)
Term configs 3, 4
only
9
PCB terms – left hand
side w/location pins
Q
Without leads (No cutout)
DC 3 only
Non-European versions
Actuator Type
D
Leads, 18 AWG (UL)
105
O
C, term config
5, DC1, DC3 only
AA
Spherical-head, no
auxiliary actuator
E
Leads, 16 AWG (UL)
105
O
C only
M
Leads, 20 AWG (UL)
105
O
C, DC1, DC3
only
For others, see actuator table at
http://switches-
sensors.zf.com/us/
2
UL current rating; see table below for complete details
Electrical Specifications – Contact Ratings
Contact
EN61058
UL1054
1 6 A, 250 VAC 5 A, 125/250 VAC; 1 A, 48 VDC
2 10 (1.5) A, 250 VAC 10.1 A, 125/250 VAC; ¼ HP, 125 VAC
3 0.1 A, 250 VAC 0.1 A, 125/250 VAC; 0.1 A, 30 VDC; 0.3 A, 60 VDC
4 3 A, 250 VAC 3 A, 125/250 VAC; 1 A, 48 VDC
UL file number E314201

Summary of content (2 pages)