User's Guide

©VVDN Technologies Pvt Ltd.
9
VVDN_Cherry Gen2 Basic Care_User Manual
Step-2.b: Generate the QR code from https://www.the-qrcode-generator.com/ and save it in your Laptop/PC.
Step-3: Press the PAIR/FC button of cherry camera for the 5-10 sec.
The cherry camera will go in pairing mode and Orange LED will start blinking till QR code is scanned successfully.
Pairing button is present at the back of the device.
Figure 4: Pairing and Reset
Step-4: Show the QR code to the cherry camera from your Laptop/PC.
White LED will start blinking while Wi-Fi connection is being established (till done). Solid white LED will lights up
for 10seconds and cherry camera will reboot after wifi connection has been made successfully
Below is the setup shown for reference:
Make sure the QR code is big enough on the screen(Full screen)
 Make sure the Device is stable and facing the Laptop which has QR code, Find reference setup images
below.