User's Guide

©VVDN Technologies Pvt Ltd.
7
VVDN_Cherry Gen2 Basic Care_User Manual
4.3 Installation
The Cherry Cam can be mounted on the wall using two M3.5 screw as shown below. After installation, if cherry
cam streams smoothly in RTSP streamer, then it is a good place for this device.
Note: Before mounting, kindly make sure to test if the desired installation location has good
Wi-Fi reception.
Figure 3: Cherry Cam Installation Steps
1. Ideal Installation Height: Around head-height i.e. 1.82m/ 6ft from the ground.
2. Mounting Screw Holes: If mounting to a wooden surface, fix the screw directly to the surface. If mounting to
masonry surface (bricks, concrete), insert wall plugs before screwing the wall.
Notes: Use the Inclinometer to fix two screw for avoiding tilting of device.
3. Wire Connection: Plug the power adaptor to AC socket and connect the right angle micro USB plug back of
the device, similarly connect the right angle RJ45, if Ethernet connection is required.