GEN 2 BASIC CARE User Guide The Home AI that cares for your loved ones. VVDN TECHNOLOGIES PVT LTD | www.vvdntech.
VVDN_Cherry Gen2 Basic Care_User Manual Copyright Notice This document is copyright of VVDN Technologies Pvt Ltd, All Rights Reserved.
VVDN_Cherry Gen2 Basic Care_User Manual Table of Contents 1 About This Document ......................................................................................................... 4 1.1 Intended Audience .................................................................................................................4 1.2 Document Conventions .........................................................................................................4 2 Overview ...........................................
VVDN_Cherry Gen2 Basic Care_User Manual 1 About This Document This document helps you to understand and operate the Cherry Gen2 Basic Care device. 1.1 Intended Audience The intended audiences for this document are End Users of this product 1.2 Document Conventions The different conventions used in this document are explained in the following table: Document Conventions Convention Note Description Note provides information about important features or instructions. This appears with a background.
VVDN_Cherry Gen2 Basic Care_User Manual 2 Overview Cherry Gen2 Basic Care is the AI based IP Camera system, Its AI understands and analyzes what’s going on at Camera and learns people's behaviors to detect accidents and send alerts to the family members and caregivers. Cherry Camera also boasts a unique approach to maintaining people’s privacy, as its computer vision algorithms turn people on video into virtual skeletons while all of the information is processed on-device.
VVDN_Cherry Gen2 Basic Care_User Manual 4 Getting Started Learn about your Camera’s hardware, assembly procedures, and how to get started using your new device. 4.1 Get to know Cherry Cam Refer below image to understand each and every component of Cherry Camera. It will help user to better understand and implement all instructions given in this manual. Figure 2: Cherry Cam Components 4.
VVDN_Cherry Gen2 Basic Care_User Manual 4.3 Installation The Cherry Cam can be mounted on the wall using two M3.5 screw as shown below. After installation, if cherry cam streams smoothly in RTSP streamer, then it is a good place for this device. Note: Before mounting, kindly make sure to test if the desired installation location has good Wi-Fi reception. Figure 3: Cherry Cam Installation Steps 1. 2. 3. Ideal Installation Height: Around head-height i.e. 1.82m/ 6ft from the ground.
VVDN_Cherry Gen2 Basic Care_User Manual 5 Video Streaming using VLC 5.1 Steps to pair Cherry cam and stream over VLC Step1. Power on & boot the cherry camera Connect the Cherry Camera to 5V power adapter and switch on the camera. BLUE LED will blink after successful booting. This is kept for indication that device is booted up successfully. Step2. QR code validation & Scanning Prerequisite: Make sure the Room is well lit and Laptop screen has good brightness for better clarity. Step-2.
VVDN_Cherry Gen2 Basic Care_User Manual Step-2.b: Generate the QR code from https://www.the-qrcode-generator.com/ and save it in your Laptop/PC. Step-3: Press the PAIR/FC button of cherry camera for the 5-10 sec. The cherry camera will go in pairing mode and Orange LED will start blinking till QR code is scanned successfully. Pairing button is present at the back of the device. Figure 4: Pairing and Reset Step-4: Show the QR code to the cherry camera from your Laptop/PC.
VVDN_Cherry Gen2 Basic Care_User Manual Figure 5: QR Code Scanning Cherry camera will connect to router with the given SSID and Password in the QR code. Step-5: Get the IP of the connected camera using the AP’s GUI or by typing the ifconfig in the UART console of the device. Step-6: Opening the RTSP Stream in VLC, Press control +N. Replace the Yellow highlighted with your IP of camera. e.g “rtsp://192.168.88.
VVDN_Cherry Gen2 Basic Care_User Manual 6 Product Functional Features FCC INFORMATION This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Changes or modifications to this equipment not expressively approved by the party responsible for compliance, or operation of this product in any way other than as detailed to by the User Manual could void the user’s authority to operate this equipment. To insure the safety of many users, the FCC has established criteria for the amount of radio frequency energy various products may produce depending on their intended use.
