User Manual

www.udirc.com

Take Off / Landing / Emergency Stop Button

Two Take Off Methods

Functions Introduction

2. Method 2 (One Button Take Off): Press the Take Off /

Landing / Emergency Stop Button (Picture 9) , the drone

will fly up automatically and keep flying at an altitude of 1.2

meters approximately.

1. Method 1 (Take off) : After frequency pairing successful,

then move the Left Stick and Right Stick at the same time

as Picture 5 shown(45 degree inward) to start the motors.

Push up the Left Stick to fly up the drone to certain altitude

and then release the stick.

Picture 9

2. Method 2 (One Button Landing): Press the Take Off /

Landing / Emergency Stop Button once shortly(picture 9),

and the drone will land on the ground automatically.

(When using this function, you can not touch the left stick, if not,

then the function will fail)

Landing Methods

1. Method 1 (Landing): Push the Left Stick all the way down

to the lowest position(Picture 2/6) and hold it till the motors

stop and the drone will land on the ground.