User's Manual

VT-M2M-TC
3g: Powercontrolof3GModule
ex1:TurnonPowerofZigBeeModule
#./powerzigbeeon
ex2:TurnoffPowerofZigBeeModule
#./powerzigbeeoff

2.2CanControl
 a. Closedevice
#ifconfigcan0down
 b. Configure CAN, set CAN’s baud rate to 1Mbps, or
100000(100kbps)
#iplinksetcan0typecanbitrate100000
#ifconfigcan0up
 c. ReceiveCANdata,itwillreceiveCANdatawhichfromother
side
#./loopback
 d.SendCANdata,itwillsendCANpackagewithIDof0x02
#./client
