User Manual
Table Of Contents
- Contents
- 1 Introduction to the Dolby Accessibility Solution User’s Manual
- 2 Dolby Accessibility Solution hardware components
- 3 Installing the Dolby Accessibility Solution Server
- 4 Configuring the Dolby Accessibility Solution audio
- 5 Configuring the Dolby Accessibility Solution with a Wi-Fi router
- 6 Configuring the Dolby Accessibility Solution Server with a digital cinema server
- 7 Configuring the Dolby Accessibility Solution Receiver
- 8 Setting up a Dolby Accessibility Solution Receiver for a patron
- 8.1 Enabling the talkback feature for visually impaired patrons
- 8.2 Connecting the Dolby Accessibility Solution Receiver to an auditorium
- 8.3 Selecting available resources for Brazil
- 8.4 Selecting available resources for regions other than Brazil
- 8.5 Adjusting the Dolby Accessibility Solution Receiver adjustable arm
- 9 Dolby Accessibility Solution default user accounts and passwords
- 10 Updating the Dolby Accessibility Solution system
- 10.1 Updating the Dolby Accessibility Solution Server software using secure FTP
- 10.2 Updating the Dolby Accessibility Solution Server software using USB
- 10.3 Updating the Dolby Accessibility Solution Server software using the web UI
- 10.4 Updating the Dolby Accessibility Solution Receiver software using the web UI
- 11 Dolby Accessibility Solution Server web UI
- 12 Dolby Accessibility Solution operational and technical specifications
- 13 Audio AES and adapter pinouts
- 13.1 RJ-45 Ethernet cable color codes
- 13.2 RJ-45 to 25-pin D-connector male adapter pinning
- 13.3 Pinouts for AES3 channels 1-8 output
- 13.4 Pinouts for AES3 channels 9-16 output
- 13.5 Pinout wiring for AES3 audio for Dolby cinema audio processors
- 13.6 Pinout wiring for AES3 audio for third-party cinema audio processors
- 13.7 Pinouts for the Dolby CP750 in 5.1 mode
- 13.8 Pinouts for the Dolby CP750 in 7.1 mode
- 13.9 Dolby CP850/Dolby CP950 pinouts
- 13.10 25-pin D-connector to dual RJ-45 adapter pinout
- 13.11 Pinouts for the Dolby IMS3000 AES3 auxiliary input or output port
- 13.12 Dolby DCP‑2000/Dolby DCP‑2K4 AES pinouts
- 14 Documentation revision history
- Glossary
Figure 54: Power options popup screen
Results
Aer
the Dolby Accessibility Solution Server reboots, the soware update process is complete.
10.4 Updating the Dolby Accessibility Solution Receiver soware
using the web UI
You can update the Dolby Accessibility Solution Receiver soware using the Dolby Accessibility Solution
Server web UI.
Prerequisites
You have received the Dolby Accessibility Solution Receiver soware package from Dolby.
About this task
With this option, you can load the Dolby Accessibility Solution Receiver soware package on a single Dolby
Accessibility Solution Server, and then update all Dolby Accessibility Solution Receivers from this single
Dolby Accessibility Solution Server.
Procedure
1. Plug the USB flash drive with the soware into the Dolby Accessibility Solution Server USB port, and then
log in to the Dolby Accessibility Solution web UI.
You can also retrieve and download the soware package from any location that can connect to the web
UI.
2. Click SETTINGS, click Update, and then under Mobile Application, click Select file.
3. Browse for the Dolby Accessibility Solution Receiver soware package, and then click Upload.
4. On the Dolby Accessibility Solution Receiver, connect to the auditorium. Then tap the BACK button once,
and in the upper-right corner, tap the gear icon.
5. Log in to the Dolby Accessibility Solution Receiver.
The default user name is admin, and the default password is signs.
6. Scroll down, tap UPDATE APP, and then tap UPGRADE when the soware update screen appears.
Updating the Dolby Accessibility Solution Receiver sowar
e using the web UI
Dolby Accessibility Solution Userʼs Manual 61
AST.OM.005498.DRM Issue 4 14 June 2022
DRAFT