User Manual
Table Of Contents
- Contents
- 1 Introduction to the Dolby Accessibility Solution User’s Manual
- 2 Dolby Accessibility Solution hardware components
- 3 Installing the Dolby Accessibility Solution Server
- 4 Configuring the Dolby Accessibility Solution audio
- 5 Configuring the Dolby Accessibility Solution with a Wi-Fi router
- 6 Configuring the Dolby Accessibility Solution Server with a digital cinema server
- 7 Configuring the Dolby Accessibility Solution Receiver
- 8 Setting up a Dolby Accessibility Solution Receiver for a patron
- 8.1 Enabling the talkback feature for visually impaired patrons
- 8.2 Connecting the Dolby Accessibility Solution Receiver to an auditorium
- 8.3 Selecting available resources for Brazil
- 8.4 Selecting available resources for regions other than Brazil
- 8.5 Adjusting the Dolby Accessibility Solution Receiver adjustable arm
- 9 Dolby Accessibility Solution default user accounts and passwords
- 10 Updating the Dolby Accessibility Solution system
- 10.1 Updating the Dolby Accessibility Solution Server software using secure FTP
- 10.2 Updating the Dolby Accessibility Solution Server software using USB
- 10.3 Updating the Dolby Accessibility Solution Server software using the web UI
- 10.4 Updating the Dolby Accessibility Solution Receiver software using the web UI
- 11 Dolby Accessibility Solution Server web UI
- 12 Dolby Accessibility Solution operational and technical specifications
- 13 Audio AES and adapter pinouts
- 13.1 RJ-45 Ethernet cable color codes
- 13.2 RJ-45 to 25-pin D-connector male adapter pinning
- 13.3 Pinouts for AES3 channels 1-8 output
- 13.4 Pinouts for AES3 channels 9-16 output
- 13.5 Pinout wiring for AES3 audio for Dolby cinema audio processors
- 13.6 Pinout wiring for AES3 audio for third-party cinema audio processors
- 13.7 Pinouts for the Dolby CP750 in 5.1 mode
- 13.8 Pinouts for the Dolby CP750 in 7.1 mode
- 13.9 Dolby CP850/Dolby CP950 pinouts
- 13.10 25-pin D-connector to dual RJ-45 adapter pinout
- 13.11 Pinouts for the Dolby IMS3000 AES3 auxiliary input or output port
- 13.12 Dolby DCP‑2000/Dolby DCP‑2K4 AES pinouts
- 14 Documentation revision history
- Glossary
Service Provider (ISP) network, and as such, it is out of the scope of ANATEL Act 77 and associated CPE
(customer-premises equipment) requirements.
Warning and safety symbols
This symbol that appears in this manual is intended to alert the user to the presence of uninsulated
“dangerous” voltage within the product enclosure that may be of suicient magnitude to constitute a
risk of electric shock to persons.
This symbol that appears in this manual is intended to alert the user to the presence of important safety
operating and maintenance instructions.
This symbol that appears on the unit rear panel and in this manual is intended to alert the user to the
presence of uninsulated “dangerous” voltage within the product’s enclosure that maybe of suicient
magnitude to constitute a risk of electric shock to persons.
This symbol that appears on the unit rear panel is intended to alert the user to the presence of important
safety operating and maintenance instructions.
Important safety instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all WARNINGS.
4. Follow all instructions.
5.
This product is for indoor use only.
6. WARNING: Do not use this apparatus near water.
7. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
8. WARNING: To prevent electric shock, do not remove the top cover or attempt to service the unit in any
way. There are no user-serviceable parts inside the unit. Refer all servicing and troubleshooting to
qualified service personnel only.
9. Clean only with dry cloth.
10. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
11. No naked flame sources, such as lighted candles, should be placed on the apparatus.
12. Protect the power cord from being walked on or pinched, particularly at plugs, convenience
receptacles, and the point where it exits from the apparatus.
13. Only use attachments/accessories specified by the manufacturer.
14. Unplug this apparatus when unused for long periods of time.
15. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as the power‐supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
16. Do not expose the apparatus to dripping or splashing, and no objects filled with liquids, such as vases,
should be placed on the apparatus.
17. WARNING: Troubleshooting must be performed by a trained technician. To reduce the risk of electric
shock, do not attempt to service this equipment unless you are qualified to do so.
Notices
Dolby Accessibility Solution Userʼs Manual 6
AST.OM.005498.DRM Issue 4 14 June 2022
DRAFT