User Manual
Table Of Contents
- Contents
- 1 Introduction to the Dolby Accessibility Solution User’s Manual
- 2 Dolby Accessibility Solution hardware components
- 3 Installing the Dolby Accessibility Solution Server
- 4 Configuring the Dolby Accessibility Solution audio
- 5 Configuring the Dolby Accessibility Solution with a Wi-Fi router
- 6 Configuring the Dolby Accessibility Solution Server with a digital cinema server
- 7 Configuring the Dolby Accessibility Solution Receiver
- 8 Setting up a Dolby Accessibility Solution Receiver for a patron
- 8.1 Enabling the talkback feature for visually impaired patrons
- 8.2 Connecting the Dolby Accessibility Solution Receiver to an auditorium
- 8.3 Selecting available resources for Brazil
- 8.4 Selecting available resources for regions other than Brazil
- 8.5 Adjusting the Dolby Accessibility Solution Receiver adjustable arm
- 9 Dolby Accessibility Solution default user accounts and passwords
- 10 Updating the Dolby Accessibility Solution system
- 10.1 Updating the Dolby Accessibility Solution Server software using secure FTP
- 10.2 Updating the Dolby Accessibility Solution Server software using USB
- 10.3 Updating the Dolby Accessibility Solution Server software using the web UI
- 10.4 Updating the Dolby Accessibility Solution Receiver software using the web UI
- 11 Dolby Accessibility Solution Server web UI
- 12 Dolby Accessibility Solution operational and technical specifications
- 13 Audio AES and adapter pinouts
- 13.1 RJ-45 Ethernet cable color codes
- 13.2 RJ-45 to 25-pin D-connector male adapter pinning
- 13.3 Pinouts for AES3 channels 1-8 output
- 13.4 Pinouts for AES3 channels 9-16 output
- 13.5 Pinout wiring for AES3 audio for Dolby cinema audio processors
- 13.6 Pinout wiring for AES3 audio for third-party cinema audio processors
- 13.7 Pinouts for the Dolby CP750 in 5.1 mode
- 13.8 Pinouts for the Dolby CP750 in 7.1 mode
- 13.9 Dolby CP850/Dolby CP950 pinouts
- 13.10 25-pin D-connector to dual RJ-45 adapter pinout
- 13.11 Pinouts for the Dolby IMS3000 AES3 auxiliary input or output port
- 13.12 Dolby DCP‑2000/Dolby DCP‑2K4 AES pinouts
- 14 Documentation revision history
- Glossary
Procedure
1. Place the Dolby Accessibility Solution Server soware package on a USB flash drive, and then insert the
USB flash drive into a USB port on the Dolby Accessibility Solution Server .
2. On the Dolby Accessibility Solution Server desktop, open the file browser and navigate to
Computer>usr>share>cineassista>pkg, and then place the Dolby Accessibility Solution Server
soware package in that folder.
3. Reboot the Dolby Accessibility Solution Server.
4. When the Dolby Accessibility Solution Server restarts, log in to the Dolby Accessibility Solution Server web
UI, read the text in the End User License Agreement (EULA), and then click AGREE.
Figure 50: End User LIcense Agreement screen
5. To verify the Dolby Accessibility Solution Server version:
a. L
og in to the Dolby Accessibility Solution web UI, and then verify that the updated soware version
appears at the upper-le corner of the screen.
10.3 Updating the Dolby Accessibility Solution Server soware using
the web UI
You can update the Dolby Accessibility Solution Server soware using the web UI.
Prerequisites
You have received the soware package from Dolby.
Procedure
1. Log in to the Dolby Accessibility Solution Server web UI.
2. From the web UI, click SETTINGS, and then click Update.
3. Under Server, click Select file, and then find and select the soware package.
4. When the End User License Agreement (EULA) appears, read the text, and then click AGREE.
Updating the Dolby Accessibility Solution Server sowar
e using the web UI
Dolby Accessibility Solution Userʼs Manual 59
AST.OM.005498.DRM Issue 4 14 June 2022
DRAFT