User Manual
Table Of Contents
- Contents
- 1 Introduction to the Dolby Accessibility Solution User’s Manual
- 2 Dolby Accessibility Solution hardware components
- 3 Installing the Dolby Accessibility Solution Server
- 4 Configuring the Dolby Accessibility Solution audio
- 5 Configuring the Dolby Accessibility Solution with a Wi-Fi router
- 6 Configuring the Dolby Accessibility Solution Server with a digital cinema server
- 7 Configuring the Dolby Accessibility Solution Receiver
- 8 Setting up a Dolby Accessibility Solution Receiver for a patron
- 8.1 Enabling the talkback feature for visually impaired patrons
- 8.2 Connecting the Dolby Accessibility Solution Receiver to an auditorium
- 8.3 Selecting available resources for Brazil
- 8.4 Selecting available resources for regions other than Brazil
- 8.5 Adjusting the Dolby Accessibility Solution Receiver adjustable arm
- 9 Dolby Accessibility Solution default user accounts and passwords
- 10 Updating the Dolby Accessibility Solution system
- 10.1 Updating the Dolby Accessibility Solution Server software using secure FTP
- 10.2 Updating the Dolby Accessibility Solution Server software using USB
- 10.3 Updating the Dolby Accessibility Solution Server software using the web UI
- 10.4 Updating the Dolby Accessibility Solution Receiver software using the web UI
- 11 Dolby Accessibility Solution Server web UI
- 12 Dolby Accessibility Solution operational and technical specifications
- 13 Audio AES and adapter pinouts
- 13.1 RJ-45 Ethernet cable color codes
- 13.2 RJ-45 to 25-pin D-connector male adapter pinning
- 13.3 Pinouts for AES3 channels 1-8 output
- 13.4 Pinouts for AES3 channels 9-16 output
- 13.5 Pinout wiring for AES3 audio for Dolby cinema audio processors
- 13.6 Pinout wiring for AES3 audio for third-party cinema audio processors
- 13.7 Pinouts for the Dolby CP750 in 5.1 mode
- 13.8 Pinouts for the Dolby CP750 in 7.1 mode
- 13.9 Dolby CP850/Dolby CP950 pinouts
- 13.10 25-pin D-connector to dual RJ-45 adapter pinout
- 13.11 Pinouts for the Dolby IMS3000 AES3 auxiliary input or output port
- 13.12 Dolby DCP‑2000/Dolby DCP‑2K4 AES pinouts
- 14 Documentation revision history
- Glossary
10.1 Updating the Dolby Accessibility Solution Server soware using
secure FTP
You can update the Dolby Accessibility Solution Server soware using secure File Transfer Protocol (FTP).
Prerequisites
You have received the Dolby Accessibility Solution Server soware package from Dolby.
Procedure
1. Open a secure FTP browser, and log in to the Dolby Accessibility Solution Server:
a. Enter the IP address of the Dolby Accessibility Solution Server.
b. Enter assista as the user name and xAwsPR9-dL as the password for the Dolby Accessibility Solution
Server.
c. In the Port field, enter 22.
2. In the Remote site field, navigate to /usr/share/cineassista/pkg, and then place the Dolby
Accessibility Solution Server soware package in that folder.
3. Reboot the Dolby Accessibility Solution Server.
4. When the Dolby Accessibility Solution Server restarts, log in to the Dolby Accessibility Solution Server web
UI, read the text in the End User License Agreement (EULA), and then click AGREE.
Figure 49: End User License Agreement
5. To verify the Dolby Accessibility Solution Server version:
a. L
og in to the Dolby Accessibility Solution web UI, and then verify that the updated soware version
appears in the upper-le corner of the screen.
10.2 Updating the Dolby Accessibility Solution Server soware using
USB
You can update the Dolby Accessibility Solution Server soware using USB.
Prerequisites
You have received the Dolby Accessibility Solution Server soware package from Dolby.
Updating the Dolby Accessibility Solution system
Dolby Accessibility Solution Userʼs Manual 58
AST.OM.005498.DRM Issue 4 14 June 2022
DRAFT