User Manual
Table Of Contents
- Contents
- 1 Introduction to the Dolby Accessibility Solution User’s Manual
- 2 Dolby Accessibility Solution hardware components
- 3 Installing the Dolby Accessibility Solution Server
- 4 Configuring the Dolby Accessibility Solution audio
- 5 Configuring the Dolby Accessibility Solution with a Wi-Fi router
- 6 Configuring the Dolby Accessibility Solution Server with a digital cinema server
- 7 Configuring the Dolby Accessibility Solution Receiver
- 8 Setting up a Dolby Accessibility Solution Receiver for a patron
- 8.1 Enabling the talkback feature for visually impaired patrons
- 8.2 Connecting the Dolby Accessibility Solution Receiver to an auditorium
- 8.3 Selecting available resources for Brazil
- 8.4 Selecting available resources for regions other than Brazil
- 8.5 Adjusting the Dolby Accessibility Solution Receiver adjustable arm
- 9 Dolby Accessibility Solution default user accounts and passwords
- 10 Updating the Dolby Accessibility Solution system
- 10.1 Updating the Dolby Accessibility Solution Server software using secure FTP
- 10.2 Updating the Dolby Accessibility Solution Server software using USB
- 10.3 Updating the Dolby Accessibility Solution Server software using the web UI
- 10.4 Updating the Dolby Accessibility Solution Receiver software using the web UI
- 11 Dolby Accessibility Solution Server web UI
- 12 Dolby Accessibility Solution operational and technical specifications
- 13 Audio AES and adapter pinouts
- 13.1 RJ-45 Ethernet cable color codes
- 13.2 RJ-45 to 25-pin D-connector male adapter pinning
- 13.3 Pinouts for AES3 channels 1-8 output
- 13.4 Pinouts for AES3 channels 9-16 output
- 13.5 Pinout wiring for AES3 audio for Dolby cinema audio processors
- 13.6 Pinout wiring for AES3 audio for third-party cinema audio processors
- 13.7 Pinouts for the Dolby CP750 in 5.1 mode
- 13.8 Pinouts for the Dolby CP750 in 7.1 mode
- 13.9 Dolby CP850/Dolby CP950 pinouts
- 13.10 25-pin D-connector to dual RJ-45 adapter pinout
- 13.11 Pinouts for the Dolby IMS3000 AES3 auxiliary input or output port
- 13.12 Dolby DCP‑2000/Dolby DCP‑2K4 AES pinouts
- 14 Documentation revision history
- Glossary
8.4.2 Selecting the closed captions option
You can specify that the patron uses closed captioning.
Procedure
1. Visually verify that the word Connected appears in the upper-le corner of the Dolby Accessibility
Solution Receiver Options screen.
Figure 48: Dolby Accessibility Solution Receiver options screen
2. Tap CLOSED CAPTION.
3. T
o go back to the Options screen, tap BACK twice.
8.5 Adjusting the Dolby Accessibility Solution Receiver adjustable
arm
You can adjust the Dolby Accessibility Solution Receiver adjustable arm for your personal preferences.
Procedure
1. To adjust the size of the mount base:
a. Rotate the knob located above the cup-holder base.
We recommend leaving the mount base adjusted close to the size of the armrest cup-holder in the
auditorium. This will reduce the amount of adjustment needed by the patron.
2. To adjust the mount neck:
a. Bend and position the rubberized extension with two hands.
3. To adjust the receiver from portrait to landscape mode (or vice versa):
a. Loosen the butterfly nut, rotate the touch screen display, and then retighten the butterfly nut.
Setting up a Dolby Accessibility Solution Receiver for a patron
Dolby Accessibility Solution Userʼs Manual 54
AST.OM.005498.DRM Issue 4 14 June 2022
DRAFT