User Manual
Table Of Contents
- Contents
- 1 Introduction to the Dolby Accessibility Solution User’s Manual
- 2 Dolby Accessibility Solution hardware components
- 3 Installing the Dolby Accessibility Solution Server
- 4 Configuring the Dolby Accessibility Solution audio
- 5 Configuring the Dolby Accessibility Solution with a Wi-Fi router
- 6 Configuring the Dolby Accessibility Solution Server with a digital cinema server
- 7 Configuring the Dolby Accessibility Solution Receiver
- 8 Setting up a Dolby Accessibility Solution Receiver for a patron
- 8.1 Enabling the talkback feature for visually impaired patrons
- 8.2 Connecting the Dolby Accessibility Solution Receiver to an auditorium
- 8.3 Selecting available resources for Brazil
- 8.4 Selecting available resources for regions other than Brazil
- 8.5 Adjusting the Dolby Accessibility Solution Receiver adjustable arm
- 9 Dolby Accessibility Solution default user accounts and passwords
- 10 Updating the Dolby Accessibility Solution system
- 10.1 Updating the Dolby Accessibility Solution Server software using secure FTP
- 10.2 Updating the Dolby Accessibility Solution Server software using USB
- 10.3 Updating the Dolby Accessibility Solution Server software using the web UI
- 10.4 Updating the Dolby Accessibility Solution Receiver software using the web UI
- 11 Dolby Accessibility Solution Server web UI
- 12 Dolby Accessibility Solution operational and technical specifications
- 13 Audio AES and adapter pinouts
- 13.1 RJ-45 Ethernet cable color codes
- 13.2 RJ-45 to 25-pin D-connector male adapter pinning
- 13.3 Pinouts for AES3 channels 1-8 output
- 13.4 Pinouts for AES3 channels 9-16 output
- 13.5 Pinout wiring for AES3 audio for Dolby cinema audio processors
- 13.6 Pinout wiring for AES3 audio for third-party cinema audio processors
- 13.7 Pinouts for the Dolby CP750 in 5.1 mode
- 13.8 Pinouts for the Dolby CP750 in 7.1 mode
- 13.9 Dolby CP850/Dolby CP950 pinouts
- 13.10 25-pin D-connector to dual RJ-45 adapter pinout
- 13.11 Pinouts for the Dolby IMS3000 AES3 auxiliary input or output port
- 13.12 Dolby DCP‑2000/Dolby DCP‑2K4 AES pinouts
- 14 Documentation revision history
- Glossary
5
Configuring the Dolby Accessibility Solution
with a Wi-Fi router
The Dolby Accessibility Solution Ethernet 1 port is configured for use with a Wi-Fi router to transmit
the accessibility information to the Dolby Accessibility Solution Receiver in the auditorium. The Dolby
Accessibility Solution Ethernet 1 default IP address is 192.168.0.50.
Important: The Dolby Accessibility Solution DAS-200 receiver Tablet model VT-TAB55-
RK68-DB8 does not use Wi-Fi 2.4 GHz CH12 and CH13 channels. When configuring a router
for Wi-Fi 2.4 GHz (Brazil only) with this Tablet, do not use the CH12 and CH13 channels.
• Wi-Fi router SSID overview
• Configuring the TP-Link AC1200 Archer C50 Wi-Fi router SSID for Brazil
• Configuring the TP-Link Archer C80 Wi-Fi router for countries other than Brazil
Configuring the Dolby Accessibility Solution with a Wi-Fi router
Dolby Accessibility Solution Userʼs Manual 28
AST.OM.005498.DRM Issue 4 14 June 2022
DRAFT