User Manual
Table Of Contents
- Contents
- 1 Introduction to the Dolby Accessibility Solution User’s Manual
- 2 Dolby Accessibility Solution hardware components
- 3 Installing the Dolby Accessibility Solution Server
- 4 Configuring the Dolby Accessibility Solution audio
- 5 Configuring the Dolby Accessibility Solution with a Wi-Fi router
- 6 Configuring the Dolby Accessibility Solution Server with a digital cinema server
- 7 Configuring the Dolby Accessibility Solution Receiver
- 8 Setting up a Dolby Accessibility Solution Receiver for a patron
- 8.1 Enabling the talkback feature for visually impaired patrons
- 8.2 Connecting the Dolby Accessibility Solution Receiver to an auditorium
- 8.3 Selecting available resources for Brazil
- 8.4 Selecting available resources for regions other than Brazil
- 8.5 Adjusting the Dolby Accessibility Solution Receiver adjustable arm
- 9 Dolby Accessibility Solution default user accounts and passwords
- 10 Updating the Dolby Accessibility Solution system
- 10.1 Updating the Dolby Accessibility Solution Server software using secure FTP
- 10.2 Updating the Dolby Accessibility Solution Server software using USB
- 10.3 Updating the Dolby Accessibility Solution Server software using the web UI
- 10.4 Updating the Dolby Accessibility Solution Receiver software using the web UI
- 11 Dolby Accessibility Solution Server web UI
- 12 Dolby Accessibility Solution operational and technical specifications
- 13 Audio AES and adapter pinouts
- 13.1 RJ-45 Ethernet cable color codes
- 13.2 RJ-45 to 25-pin D-connector male adapter pinning
- 13.3 Pinouts for AES3 channels 1-8 output
- 13.4 Pinouts for AES3 channels 9-16 output
- 13.5 Pinout wiring for AES3 audio for Dolby cinema audio processors
- 13.6 Pinout wiring for AES3 audio for third-party cinema audio processors
- 13.7 Pinouts for the Dolby CP750 in 5.1 mode
- 13.8 Pinouts for the Dolby CP750 in 7.1 mode
- 13.9 Dolby CP850/Dolby CP950 pinouts
- 13.10 25-pin D-connector to dual RJ-45 adapter pinout
- 13.11 Pinouts for the Dolby IMS3000 AES3 auxiliary input or output port
- 13.12 Dolby DCP‑2000/Dolby DCP‑2K4 AES pinouts
- 14 Documentation revision history
- Glossary
2.1 Dolby Accessibility Solution packing list
The Dolby Accessibility Solution packing list itemizes the hardware components that ship in separate boxes.
The Dolby Accessibility Solution Server ships with these hardware components in a box:
• Dolby Accessibility Solution Server
• Power adapter and power cord
• Two audio Y-cables
• Two RJ-45 Ethernet cables
• Two 25-pin D-connector to RJ-45 audio adapters
• Two RJ-45 to RJ-45 female Ethernet connectors (also known as couplers)
• 25-pin D-connector female to 25-pin D-connector female adapter (also known as a gender changer)
The Dolby Accessibility Solution Receiver ships with these hardware components in a box:
• Dolby Accessibility Solution Receiver with adjustable arm
• Micro Universal Serial Bus (USB) cable
• Stereo headphones with replaceable earpads
• Charging adapter
The Wi-Fi router (where available) ships with these hardware components in a box:
• Wi-Fi router
• Power adapter
2.2 Dolby Accessibility Solution Server hardware components
The Dolby Accessibility Solution Server and its hardware components ship in the same box.
2.2.1 Dolby Accessibility Solution Server
The Dolby Accessibility Solution Server is the dedicated device that processes accessibility information for
transmission of Hearing Impaired (HI) audio tracks, Visually Impaired-Narration (VI-N) audio tracks, closed
caption information and Libras sign language information from a digital cinema server to the Dolby
Accessibility Solution Receiver.
The Dolby Accessibility Solution Server contains an input/output shield for the dierent connectors.
Figure 2: Dolby Accessibility Server rear panel with input/output shield
Dolby Accessibility Solution packing list
Dolby Accessibility Solution Userʼs Manual 15
AST.OM.005498.DRM Issue 4 14 June 2022
DRAFT