User's Manual

5
III. Equipment Appearance
5.1!Terminal Description
FleetOne shipborne satellite broadband terminal enables device installation,
connectivity, and power on and off with simple operation. Meanwhile, it uses indicators
to clearly indicate its operation status.
Figure 2 BDU
【1】 Terminal nameplate: it contains the name, model, serial number and other
information of the terminal.
【2】 Power interface: connect the DC power supply 10.8 V~31.2 V and maximum
120 watt DC power input
【3】 LAN interface: wired LAN network interface that can connect wired network
devices and PC.
【4】 Serial interface: provide RS232 serial data input and output.
【5】 I/O interface: auxiliary data input/output interface.
【6】 Antenna interface: it is used to connect RF cable to ADU.
【7】 WiFi interface: it is used to connect WiFi antenna.
【8】 Mounting hole: φ4.5 hole for mounting and fixing BDU.
【9】 BDU indicator: indicate the BDU state; green light indicates the normal state.
ADU indicator: indicate the ADU state; green light indicates the normal state.
Register indicator: it indicates the current register state; green light indicates the
“Registered” state.
Connection indicator: it indicates the current continuous state; the green light
will be on when there is voice or data connection.
【10】Handle interface: it is used to connect the handle.
【11】SIM card slot cover: it is used for protecting the SIM card slot and the reset
button.
【12】Power switch: “1” for startup, and “0” for shut down.