User's Manual

include following aspects.

! It can be used on all Internet applications.

! It can be only used to receive and send e-mails and is not allowed to be

used on other Internet applications.

! It can be only used to browse the webpage and is not allowed to be used

on other Internet applications.

! It can be only used to browse the webpage as well as receive and send

e-mails, and is not allowed to be used on other Internet applications.

! Only the spaceon chat can be used.

" MAC address filtration: If the MAC address is added to one device in the

blacklist, such address will fail to be connected with the FleetOne terminal in

the wired or wireless way. The device provides 10 client-side physical

addresses at most, which are added to the blacklist.

Settings->SIM:

Click the “SIM” parameter configuration tag to enter the SIM card parameter

configuration interface:

Figure 34 SIM Menu

" Current card button binding: Bind the current SIM card with the FleetOne

terminal. After the FleetOne terminal is bound, the FleetOne terminal will fail

to use other SIM cards. Be sure to insert the SIM card, which was bound

previously into the device when binding is released;

" Switch button: Turn on/off the PIN code switch of SIM card. In case of start-up

after the button is turned on, the device can be used normally when the correct

PIN code is inputted;

" Modification button: It is used to modify the PIN code.

" Reset button: It is required to reset the PIN code when the PIN code is

forgotten. Input the PUK code and rest the PIN code. Please contact the SIM

card provider or distributor when forgetting the PUK code.

Note: The PIN code will be locked after it is inputted incorrectly. It is required to input

the PUK code to set the new PIN code. Therefore, please use the PIN code carefully.

Settings->Track:

Click the “Track” parameter configuration tag to enter the “Track” parameter