User's Manual

IV. Quick Application

For the first use of the terminal, the following steps shall be followed:

!! Step 1 Install SIM card

1)! Loosen the fixing screws of the SIM card slot cover [11], and remove the SIM

card slot cover and the sealing cotton;

2)! Insert the SIM card into the SIM card slot [14] according to the direction of the

identification. After a "click" sound is heard and the SIM card no longer pops

up, the SIM card is installed in place;

3)! Put the SIM card slot cover and sealing cotton back in place and tighten the

screws;

!! Step 2 Install ADU

1)! Select an appropriate location to install the ADU, and the installation location

should be free of obstruction and radar radiation and be kept away from heat.

For details on the selection of the installation location, refer to the ADU

Installation Manual;

2)! Use fasteners ④⑤⑥⑦⑧ of installation accessories to secure the ADU

bracket⑨ (see Figure 1 for the material object);

3)! Insert the end of the RF cable ② N-type connector from the bottom up into

the ADU bracket ⑨ and the cushioning gasket③, and then screw the cable

N-type connector onto the ADU① N-type socket;

4)! Finally, fix the ADU① and the cushioning gasket ③ on the ADU bracket⑨;

5)! Insert the cable tail clamp ⑪ into the lower end of ADU bracket ⑨ and fix

the cable tail, and then screw in the M4×8 screw⑩ to fix the cable tail clamp;

① ADU (1 piece)

② RF cable (1 piece)

③ Cushioning gasket (1 piece)

④ Washer 6 (14 pieces)

⑤ Screw M6×20 (6 pieces)

⑥ U-shaped round clip (4 pieces)

⑦ Nut M6 (8 pieces)

⑧ Fixing plate (2 pieces)

⑨ ADU bracket (1 piece)

⑩ Fixing screw M4×8 (3 pieces)