User's Manual

- Built-in Beacon firmware. Compatible with BLE.
- Accurate digital RSSI. Excellent link budget (up to 97dB).
- Enable remote application, AES security coprocessor.
- Ultra wide range transmission power: 4dBm— -40dBm.
- Stable performance and controllable state.
- All hardware interface completely open. Developers do not need to rely on the
SDK for development. The requirement of hardware interface can be customized
(achieved a certain number).
- All the parameters can be configured (UUID, Major, Minor, Measured Power, TX
Power, etc.). Encrypted parameter, a password is needed when access to configure.
- Provide IOS and Android SDK.
- Apple iBeacon certified.
- Support “SLEEP” and “WAKE-UP”.
Jaalee Beacon Parameter Default Setting
-UUID: EBEFD083-70A2-47C8-9837-E7B5634DF524
-Major and minor identifier: 0x0001, 0x0001
-Default pairing password: 0x666666
-Power Value: 0xCB
-Broadcast Interval: 0x0A
-It can be rang when starting or wake-up.
-The default mode is sleep.