User's Manual

User Manual
Version: V1.0.0
3
1.3 Packing list
Host *1, instruction *1, warranty card *1, certificate of conformity *1, 3M glue *1, key pin *1
2. Instructions
2.1. Power on / off
2.1.1Press the button for a short time to start and turn on pairing;
2.1.2. Press for more than 5 seconds to reset the device, and reset the device to clear the
gateway ID;
2.1.3. Press the button 3 times to shut down the machine and the device is offline
2.2. Pair correlation
2.2.1. The gateway press the key twice to start pairing, the temperature and humidity node
press the switch hole once to start pairing, the LED flashes when pairing, and press the key
again to refresh the pairing time;
2.2.2. The pairing time is 2 minutes. If it is more than 2 minutes, the pairing fails and the
distribution network mode is exited.
Note: it is recommended that the distance between the gateway and the
temperature and humidity node should be 15m, and metal barriers should be
avoided between the gateway and the node.
2.3. Indicator light description
Type description
Pairing mode LED flashing green.
Pairing successful The LED lights up green and goes out after 5 seconds.
Power on The green light of the on / off led goes out after 1 second