User's Manual

SZU06A1 Product Manual
SZU06A1 PM(Rev 2.0)
2
Module
Chip
FLAH
RAM
Sealing Dimension
SZU06A1
EFR32MG1V132
256KB
32KB
19mm * 25mm * 3.7mm
Table 1- 1 Model of SZU06A1 Module
The SZU06A1 is used for ZigBee applications (www.zigbee.org). If you don’t want to use the
AT instruction interface we provided and expect to develop your own software, you need to
download the official Simplicity Studio V4 development tool and Ember Z-net_5.9.0 or later
protocol stack of Silicon Labs.
2
Approvals
2.1CE Approvals (ETSI)
SZU06A1 ZigBee wireless communication module is certified CE by the following standards:

EMC： Draft ETSI EN 301 489-1 V2.2.0:2017
Draft ETSI EN 301 489-17 V3.2.0:2017

Radio： EN 300 328 V2.1.1:2016
EN 62479:2010

Safety： EN 60950-1:2006/A11:2009/A1:2010/A12:2011/A2:2013
The information of antennae for tests is shown in the following table:
Type
Product
Manufacturer
wavelength
Impedan
Gain
Antenna
W1010
Pulse Electronics
1/4, dipole
50Ω
2.0dBi
Table 2- 1 Approved Antennae
When SZU06A1 ZigBee wireless communication module is embedded into an OEM product, it
is prohibited to declare that his OEM products comply with CE certification in the name of
approved CE certification of our company. If the OEM manufacturer wants to declare that his
final products comply with CE certification, it must be ensured that the final products shall
comply with the European EMC, Radio and Safety standards. Otherwise, ChengDu DiYue
Technology Co., Ltd. has the right to investigate and affix the responsibility for it.