User's Manual
Table Of Contents
- General
- Module introduction
- Hardware description
- Approvals
- CE Approvals (ETSI)
- FCC Approvals
- ATEX Approvals
- Module Pinout
- Hardware Description
- Hardware Diagram
- Interface characteristics
- Absolute Maximum Ratings
- Environmental characteristics
- Recommended operating conditions
- DC Electrical Characteristics
- Digital IO Specifications
- AC Electrical Characteristics
- Physical Dimensions and Footprint
- Physical Dimensions
- Recommended Footprint
- Soldering Temperature Time Profile (for reflow so
- Recommended temperature time profile for lead-fre
- Reliability Test
- Application Precautions
- Safety precautions
- Engineering design and using precautions
- Storage conditions
- Packaging
- Carrier tape
- Reel
- Ordering Information
- Drawing of Product Label
- Disclaimer
- RoHS Declaration
- Data Sheet Status
- Reference Documents
- Contact Information
SZU06A1 Product Manual
SZU06A1 PM(Rev 2.0)
9
4.2 Interface characteristics
Parameter
Test
conditions
Minimum
value
Typical
values
Maximum
value
Unit
UART Baud Rate
9600
115200
bps
Analog channel resolution
Half-duplex
6
12
bit
Analog input impedance
20
kΩ
Analog input voltage
2.1
3.3
3.9
V
GPIO output voltage
-0.3
3.9
V
Real-time clock frequency
32.768
kHz
Table 4-1 SZU06A1 Interface Characteristics
SZU06A1 ZigBee wireless communication module provides a U.FL interface for attaching one
external SMA antenna or a PCB antenna.
In order to obtain the module’s optimal RF performance, it is recommend to use the antenna
and feeder provided by our company.