User's Manual
Table Of Contents
- General
- Module introduction
- Hardware description
- Approvals
- CE Approvals(ETSI)
- FCC Approvals
- ATEX Approvals
- Module Pinout
- Hardware Description
- Hardware Diagram
- Interface characteristics
- Absolute Maximum Ratings
- Environmental characteristics
- Recommended operating conditions
- DC Electrical Characteristics
- Digital IO Specifications
- AC Electrical Characteristics
- Physical Dimensions and Footprint
- Physical Dimensions
- Recommended Footprint
- Soldering Temperature Time Profile (for reflow so
- Recommended temperature time profile for lead-fre
- Reliability Test
- Application Precautions
- Safety precautions
- Engineering design and using precautions
- Storage conditions
- Packaging
- Carrier tape
- Reel
- Ordering Information
- Drawing of Product Label
- Disclaimer
- RoHS Declaration
- Data Sheet Status
- Reference Documents
- Contact Information
SZU06C1 Product Manual
SZU06C1 PM(Rev 2.0)
10
4.2
Interface characteristics
Parameter
Test
conditions
Minimum
value
Typical
values
Maximum
value
Unit
UART Baud Rate
9600
115200
bps
Analog channel resolution
Half-duplex
6
12
bit
Analog input impedance
20
kΩ
Analog input voltage
2.1
3.3
3.9
V
GPIO output voltage
-0.3
3.9
V
Real-time clock frequency
32.768
kHz
Table 4-1 SZU06C1 Interface Characteristics
SZU06C1 ZigBee wireless communication module provides a U.FL interface for attaching one
external SMA antenna or a PCB antenna.
In order to obtain the module’s optimal RF performance, it is recommend to use the antenna
and feeder provided by our company.