User guide

8
LED Board 80H033215-003 ver. 1.1~1.2
User’s Manual
15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,
Tel: [phone] Fax: [phone] Email: [e-mail]
www.chenbro.com
Backplane and LED Board Wiring
1. Use 4 pcs of SATA-II cable per backplane for HOST to Backplane connection.
2. For the Fan connectors, connect the system middle Fan (3P3C) to the Backplane.
3. For the Fail LED output, connect the attached cable from RAID card (only if failure LED output is
supported) to Backplane (CN2).
Wiring of SAS / SATA-II BP (2U~4U)