SK33502 ver. B0 User’s Manual CHENBRO User’s Manual SK33502 Version B0 December / 9 / 2008 15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C., Tel: +886 2 82265500 Fax: +886 2 82265392 Email: info@chenbro.com.tw 1 w w w . c h e n b r o .
SK33502 ver. B0 User’s Manual Copyright Copyright © 2006 CHENBRO Micom Co., Ltd.. All rights reserved. Unless otherwise indicated, all materials in this manual are copyrighted by CHENBRO Micom Co., Ltd.. All rights reserved. No part of this manual, either text or image may be used for any purpose other than internal use within purchasing company.
SK33502 ver. B0 User’s Manual Contents 15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C., Tel: +886 2 82265500 Fax: +886 2 82265392 Email: info@chenbro.com.tw 3 w w w . c h e n b r o . c o m Copyright......................................................................................................................................................2 Technical Support....................................................................................................................
SK33502 ver. B0 User’s Manual Revision History Date Dec. / 9 / 2008 Modifications z First Release w w w . c h e n b r o . c o m 15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C., Tel: +886 2 82265500 Fax: +886 2 82265392 Email: info@chenbro.com.
SK33502 ver. B0 User’s Manual Safety Information z Read the installation instructions before connecting SK33502 to the power source. z Only trained and qualified personnel should be allowed to install, replace or service this equipment. z Never install this product in a wet environment. z Position system cables and power cables carefully; route system cable and the power cable and plug so that they cannot be stepped on or tripped over.
SK33502 ver. B0 User’s Manual Getting Start with the SK33502 Storage Kit Thank you for purchasing SK33502! This section covers unpacking and identifying components. Unpacking and Checking the Contents The complete SK33502 package includes the following items: Item Description Quantity SK33502 Storage Cage 1 Hot-swap 3.
SK33502 ver. B0 User’s Manual Introduction The CHENBRO SK33502 can house five 3.5” HDDs in a three 5.25” bays converter (Depth of 9.5” recommended). The ability for conversion allows existing servers to perform the maximum HDD density while keeping the flexibility. In all, SK33502 is the best solution as value added feature and performance. Functional Specification General z Support SAS and SATA-II (3Gb/s) z Compatible with 3.
SK33502 ver. B0 User’s Manual Mechanical Dimension unit: mm w w w . c h e n b r o . c o m 15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C., Tel: +886 2 82265500 Fax: +886 2 82265392 Email: info@chenbro.com.
SK33502 ver. B0 User’s Manual Components Description Front View 2 1 3 4 5 6 HDD1 7 HDD2 HDD3 HDD4 HDD5 8 Function 1 USB jack Front USB Extender 2 Alarm mute button Click to stop the system failure alarm 3 Overheat Warning LED Red LED On - Temperature overheat 4 Fan failure LED Red LED On - Fan failure 5 HDD failure LED Red LED On - HDD failure 6 3.
SK33502 ver.
SK33502 ver. B0 User’s Manual Rear View – Cover Removed SATA or SAS HDD access LED signal auto selection Device Function [CN8] SATA or SAS HDD access LED signal auto selection Refer to Page 13 Refer to page 16 for rear fan cover removal. Connector & Switch Definition This pin header is for the SATA RAID card with HDD failure signal support such as ARECA ARC-1230 & 1260. Connect the failure signal pin header on SK33502 backplane and RAID card to activate the HDD failure LED. 15Fl., No.
SK33502 ver. B0 User’s Manual Setting for HDD Failure Signal Cable Connection (SK33502 Backplane) HDD 1 HDD 2 HDD 3 HDD5 HDD 4 Setting for HDD Failure Signal Cable Connection (RAID Card) Connect the 4-pin HDD LED cable to the CATHODE of the HDD failure pin header on RAID card. Refer to your RAID card’s user manual for the detailed pin definition. HDD Activity Signal Jumper The default jumpers are installed for SATA-II (3.0 Gb/s) HDDs which support activity signal via pin-11 of the jack on HDD.
SK33502 ver. B0 User’s Manual Setting for SATA-I HDD (RAID Card) Connect the 5-pin HDD LED cable to the CATHODE of the HDD activity pin header on RAID card. Refer to your RAID card’s user manual for the detailed pin definition.
SK33502 ver. B0 User’s Manual Installation Procedures The following is the installation procedures for HDD and rear cover assembly. Hot-swap HDD Assembly a. Push the blue latch on HDD tray and pull it out from the cage b. Attach HDD with four screws per tray w w w . c h e n b r o . c o m 15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C., Tel: +886 2 82265500 Fax: +886 2 82265392 Email: info@chenbro.com.
SK33502 ver. B0 User’s Manual c. Insert HDD tray to the cage w w w . c h e n b r o . c o m 15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C., Tel: +886 2 82265500 Fax: +886 2 82265392 Email: info@chenbro.com.
SK33502 ver. B0 User’s Manual Accessing the Exhaust Fan a. Unplug the fan power connector b. Push the tab on the right side (where have “PUSH” mark on the rear cover) c. Pull out the fan holder w w w . c h e n b r o . c o m 15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C., Tel: +886 2 82265500 Fax: +886 2 82265392 Email: info@chenbro.com.
SK33502 ver. B0 User’s Manual Accessing backplane assembly a. After removing the rear exhaust fan, unscrew four screws to remove the rear cover w w w . c h e n b r o . c o m 15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C., Tel: +886 2 82265500 Fax: +886 2 82265392 Email: info@chenbro.com.
SK33502 ver. B0 User’s Manual b. Remove two screws on the backplane w w w . c h e n b r o . c o m 15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C., Tel: +886 2 82265500 Fax: +886 2 82265392 Email: info@chenbro.com.
SK33502 ver. B0 User’s Manual Relative Part Number List CHENBRO Part Number Description Unit 80H035335-001 SK33502 LED Board pcs 80H105335-003 SK33502 5-Port SATA /SAS Backplane pcs 26H123215-002 Serial ATA Cable, 700mm pcs 26H115335-001 HDD failure / activity signal Cable, 5P to 5P, 600mm pcs 30H080032-102 80mm (Thickness 32mm), Ball Bearing Fan pcs 83H555335-016 Hot-swap HDD Tray pcs Remark w w w . c h e n b r o . c o m 15Fl., No.
