User's Guide

Instruction
Using Earbuds
Packing List
Bluetooth Earbuds*2 Charging Case User’s Guide
Micro USB Cable
Eartips*3
Product Parameter
Multi-function key
LED indicator
Charging case
Ear tips can be replace
Pair them with your device
Charge
Use a charger under 5V/2A to charge charging case
Turn them on
Wear your Earbuds
How to charge
The case cover
must be closed
L: put left earbud in it:
Red light: charging or no power need charging
Blue light: full power, after 1 min turn off
R: put right earbud in it:
Red light: charging or no power need charging
Blue light: full power, after 1 min turn off
M: Light shows Blue: 30% - 100% power
Light shows red: less than 30% power
Fast flash red for 5 min: only left 1% power
M turn off: The charging case will stop work in 15s
R
M
L
Step 1: Open the charging case
“W wirsless earphones”
Monaural Mode
Step 1: Delete Bluetooth history
record (“W wireless earphones”)
on your phone.
Step 2: Turn off Bluetooth
on your phone.
Flash red
Flash blue and red
“W wirsless earphones”
“W wirsless earphones R”
Attention
Important Tips
Step 4: Take out the one you want to use.
Flashing blue and red
No light flashing
If take “L” out from charging case:
Earbuds indicator flash red and blue within 3s.
If take " R "out from the charging case:
Earbuds indicator flash red and blue within 30s.
Step 3: Put earbuds into the charging case and close the charging case
cover
W wireless earphones
1.BT Version: BT5.0
2.Stand-by Time: About 100 hours
3.Call Time: About 240 mins
4 Play Time: About 240 mins
5 Earbuds Charging Time: About 60 mins
Pairing instructions (binaural mode)
charging case to charge the earbuds
Step 2: Take out them from charging case, one of the earbuds (L) will flash
red and blue within 5 seconds, and the other earbuds (R) will not flash.
Notice: if you take out the left earbud in first, then must be take out the
right earbud in 20 seconds.
Step 3: Turn on the cellphone Bluetooth, search for “W wireless earphones”,
clicking it, the left channel will prompt the “connected” .
Step 5: Turn on Bluetooth on your phone,"L" search "W wireless earphones" ,
"R"search "W wireless earphones R"
If it has been paired before, it will be automatically paired successfully.
When using dual earbuds, the effective distance between the left earbuds and
the right earbuds is within 10 meters; when the two earbuds are separated by this
distance, the playback of earbuds will be intermittent.
When the two earbuds are connected, only one has sound or (The solution is as
follows)
1. Turn off the earbuds;
2. Then wear one to your ear, , press and hold the multi-funtion key for 12--13
seconds, you will hear the voice prompts “deng deng”; then release. ( the other do
the same operating mode)
3. Hold and long press the right and left earbuds for 2 seconds at the same time, the
indicator of left one will flash red and blue and the right no light flash. Then connect
Bluetooth on yourmobile phone to Binuaural TWS palyback mode.
1. Please full charge the wireless eabuds at the first time.
2. The earbuds underwater more than 5 minutes, you must be dry it first when you
use it again. Otherwise, maybe sometimes the earbuds sound will be loud or small.
3. If the earbuds have water, , you must be dry it first and then use it again.
Do not charge it with water directly.
4. Waterproof performance is only for fresh water, tap water, sweat, swimming pool
water and salt water. Under certain circumstances in the above five types of
environment, the waterproof performance may not be applicable. Waterproof
performance is not applicable in other liquid environments except the above five
types.
5. The earbuds is IPX7 waterproof, the charging case is not waterproof, please do
not seep into the interior when using.
折叠尺寸70*80mm
前
后
When the three indicators of the charging case are light on, taking two earbuds
out from the charging case, the left and right earbuds will be turn on automatically
and go to the interconnection mode. After 1-2 seconds, the earbuds will pair
successfully, Turn on the phone Bluetooth and start normal pairing.
Instruction
LED Indicator
Charging :
Flashing Red
Indicator turn off
Fully Charged
:
TWS mode multi-function key
Press multi-function key
( left or right) : play/pause
Double-click the left
earbud: volume +
Three-click the left
earbud: volume –
Double-click the right
earbud: volume +
Three-click the right
earbud: volume -
Charge
Charging:
Flashing Red
Fully Charged:
Steady Blue
Light turn off after about 60s
Long press the earbud for about 3 seconds until the voice prompts "du"
to switch songs(left is the previous song, right is the next song)
Long press the left earbud or the right earbud casually for 1 second then
release, you can open the function of voice trigger
When the earbuds and the charging case are in the shut down state,
take out the earbuds from the charging case, press and hold 2S until the
earbuds light is red, then release and it will start work about pairing mode.
Charging case without led light on
1.Take out the earbuds from charging case
2. Press and hold 2s when earbuds indicator LED with red light release them
Long press for 2s,
show red light.
the earbud turn on.
Long press for 10s,
show red light.
the earbud turn off.
Long press for 2s,
show red light.
the earbud turn on.
Long press for 10s,
show red light.
the earbud turn off.
If the operation mode of the product has been changed, please refer to the actual product
User’s Guide
The earbuds will automatically turn on after
taking out the charging case。
connected
Binaural Wireless Bluetooth Earbuds
Model:W9