Datasheet

Rev. A (6/30) Page 2 of 2
Saffierlaan 5, 2132 VZ, Hoofddorp, NL ! [phone] ! www.chemtronicseu.com
Availability
FSA50
50 presaturated wipes per tub,
3.5” x 4.3” (9 cm x 11 cm)
Technical and Application Assistance
To answer your technical and application related questions,
contact CHEMTRONICS at [phone].
Note:
This information is believed to be accurate. It is intended for
professional end users having the skills to evaluate and use
the data properly. CHEMTRONICS does not guarantee the
accuracy of the data and assumes no liability in connection
with damages incurred while using it.
Environmental Impact Data
HCFC 225 None
HCFC-141b None
HFC None
nPB None
Hydrochlorofluorocarbons (HCFCs) are regulated under the Montreal Protocol
as Class II ozone depleting substances. HCFC-141b is no longer produced in
the US under this legislation. HCFC-225 is planned for production phase-out
in 2015. Hydrofluorocarbons (HFCs) are not currently regulated.
EPA has listed n-propyl bromide (nPB) as an acceptable alternative to ozone
depleting substances in metal, precision, and electronics cleaning under
Section 612 of the Clean Air Act.
Fusion Splice Wipes
Product# FSA50
Usage Instructions
For industrial use only. Read SDS carefully prior to
use.
FSA50 tub directions:
Remove top of container and pull the first wipe from
center of roll and feed it through the opening in the lid.
Replace lid and pull wipe from the tub at a 45° degrees
angle with a fast motion. Fold the wipe around the
glass fiber and wipe towards the end. Keep container
closed to prevent wipes from drying out.
Cleaning directions:
General cleaning: Wipe surfaces thoroughly to remove
contaminants. When removing heavy soils, use a clean
wipe for final wipe down.