Datasheet

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU)
2015/830
Electro-Wash® PX ES810E, ES1010E
SECTION 9: Physical and chemical properties
50°C
Melting point/freezing point
Initial boiling point and
boiling range
Vapour pressure
Relative density
Vapour density
Solubility(ies)
Not available.
Not available.
>1 [Air = 1]
26.4 kPa [room temperature]
Not available.
Evaporation rate
>1 (butyl acetate = 1)
Auto-ignition temperature
Flash point
Not available.
Closed cup: <-18°C [Tagliabue.]
Lower: 1.2%
Upper: 7.7%
Not available.
Not available.
Viscosity
Not available.
Partition coefficient: n-octanol/
water
Upper/lower flammability or
explosive limits
Explosive properties
:
:
:
:
:
:
:
:
:
:
:
:
:
Not available.
Oxidising properties
:
9.2 Other information
Decomposition temperature
:
Not available.
Type of aerosol
:
Spray
Heat of combustion
:
20.6 kJ/g
Ignition distance
:
90 cm
Flammability (solid, gas)
:
Not available.
No additional information.
Solubility in water
:
Not available.
10.6 Hazardous
decomposition products
10.4 Conditions to avoid
Avoid all possible sources of ignition (spark or flame). open flames, sparks and
static discharge Do not spray on a naked flame or any incandescent material. Do
not pressurise, cut, weld, braze, solder, drill, grind or expose containers to heat or
sources of ignition.
Under normal conditions of storage and use, hazardous decomposition products
should not be produced.
The product is stable.
10.2 Chemical stability
Reactive or incompatible with the following materials: alkalis Alkaline. Strong
oxidizing materials
:
:
:
10.5 Incompatible materials
:
10.3 Possibility of
hazardous reactions
:
Under normal conditions of storage and use, hazardous reactions will not occur.
SECTION 10: Stability and reactivity
10.1 Reactivity
:
No specific test data related to reactivity available for this product or its ingredients.
Date of issue/Date of revision
:
12/15/2016
Date of previous issue
:
No previous validation
Version
:
1
9/16