Datasheet

USAGE INSTRUCTIONS

For industrial use only.

Read MSDS carefully prior to use.

Hold pen vertically and briefly depress tip to

start liquid flow. Rub pen tip on surface to be

fluxed. After soldering, wipe area around

soldered joint using a ControlWipe to

remove unreacted flux.

No Clean flux residues are designed to be left

on the board, however, they can be easily

removed with Chemtronics Flux-Off



Lead-

Free Flux Remover (ES897B or ES1697) or

CircuitWorks



Lead-Free Flux Remover Pen

(CW9400).

AVAILABILITY

CW8400 9 gm (0.32 oz)

TECHNICAL & APPLICATION

ASSISTANCE

ITW Chemtronics



provides a technical hotline to

answer your technical and application related

questions. The toll free number is: 1-800-TECH-

401.

NOTE: This information is believed to be accurate.

It is intended for professional end users having the

skills to evaluate and use the data properly.

ITW CHEMTRONICS



does not guarantee the

accuracy of the data and assumes no liability in

connection with damages incurred while using it.

MANUFACTURED BY:

ITW CHEMTRONICS

8125 COBB CENTER DRIVE

KENNESAW, GA 30152

1-770-424-4888

REV. A (01/06)

Chemtronics and CircuitWorks are registered trademarks of

DISTRIBUTED BY: