Datasheet

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU)
2015/830
CircuitWorks® Overcoat Pen
SECTION 12: Ecological information
Mobility
Not available.
:
LogP
ow
BCF
Potential
12.3 Bioaccumulative potential
12.6 Other adverse effects
No known significant effects or critical hazards.
Product/ingredient name
2-methoxy-1-methylethyl
acetate
1.2
-
low
propyl acetate
1.4
-
low
butanone
0.3
-
low
12.2 Persistence and degradability
Conclusion/Summary
:
Not available.
PBT
:
Not applicable.
vPvB
:
Not applicable.
12.4 Mobility in soil
Soil/water partition
coefficient (K
OC
)
Not available.
:
12.5 Results of PBT and vPvB assessment
:
The classification of the product may meet the criteria for a hazardous waste.
Hazardous waste
:
:
Methods of disposal
SECTION 13: Disposal considerations
The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should be
consulted for any available use-specific information provided in the Exposure Scenario(s).
13.1 Waste treatment methods
Product
Packaging
Methods of disposal
:
Special precautions
:
The generation of waste should be avoided or minimised wherever possible. Waste
packaging should be recycled. Incineration or landfill should only be considered
when recycling is not feasible.
This material and its container must be disposed of in a safe way. Care should be
taken when handling emptied containers that have not been cleaned or rinsed out.
Empty containers or liners may retain some product residues. Vapour from product
residues may create a highly flammable or explosive atmosphere inside the
container. Do not cut, weld or grind used containers unless they have been cleaned
thoroughly internally. Avoid dispersal of spilt material and runoff and contact with
soil, waterways, drains and sewers.
The generation of waste should be avoided or minimised wherever possible.
Disposal of this product, solutions and any by-products should at all times comply
with the requirements of environmental protection and waste disposal legislation
and any regional local authority requirements. Dispose of surplus and non-
recyclable products via a licensed waste disposal contractor. Waste should not be
disposed of untreated to the sewer unless fully compliant with the requirements of
all authorities with jurisdiction.
Date of issue/Date of revision
:
5/15/2017
Date of previous issue
:
No previous validation
Version
:
1
11/14