Datasheet

!
!
Rev. D (7/18) Page 1 of 2
1-770-424-4888 ! www.chemtronics.com
!!! !
Typical Product Data and Physical Properties
COMPOSITION:
Material: Part A: Adhesive
Part B: Hardener
Color: Bright Silver
Gray Silver
Silver Content: >75%
CURED COMPOUND:
Volume Resistivity: <0.001 ohm-cm
Thermal Conductivity:
Cal-cm/sec-cm
2
-°C 3.8 x 10
-3
BTU-in/hr-ft
2
-°F 11.0
W/m°K 1.6
Operating Temperature Range: -67°F to 300°F
(-55°C to 150°C)
Tensile Lap Shear: >70-140 Kgm-cm
2
(ASTM D-1002) (>1000 to 2000 lbs/in
2
)
Shore D Hardness: >70
Adhesion: Excellent
Cured Flexibility: Excellent
Chemical Resistance: Excellent
Moisture Resistance: Good
Typical Thickness: 5 mil
Shelflife 12 months
(Conditions: Store at temperatures below 120°F (49ºC)
RoHS Compliant Yes
CircuitWorks
â
60 Minute
Conductive Epoxy
Product# CW2460
Product Description
The 60 Minute Conductive Epoxy is a two part, silver epoxy
used in prototype, repair and general solder-less conductive
bonding applications. It features strong mechanical bonds,
excellent electrical conductivity, and extended pot life for
increased work time. Components can be easily placed and
replaced before full cure occurs. For accelerated cure, simply
heat material to 212˚F (100˚C). This conductive epoxy bonds
aggressively to a wide variety of materials
• Two-component product with simple mixing ratios
• 60 minute work time offers increased workability and
extended pot life
• Excellent electrical and thermal conductivity
• High strength bond adheres dissimilar surfaces
• Operating temperature range from -67
°F (-55°C) to
300
°F (150°C)
Typical Applications
60 Minute Conductive Epoxy may be used for electronics
applications including:
• Conductive Bonds Between Heat Sensitive Components
• Solderless Surface Mount Connections
• Circuit Board Trace Repair
• Static Discharge and Grounding
• Solder Repair
• Conductive Structural Adhesions
• Conductive Structural Adhesions