Datasheet

!
!
!
1-770-424-4888 ! www.chemtronics.com
Rev. B (6/18) Page 2 of 2
!
!
8125 Cobb Center Drive, Kennesaw, GA 30152 ! 1-770-424-4888 ! www.chemtronics.com
Usage Instructions
For industrial use only. Read SDS carefully prior to use.
Remove wipe from packets and lightly wipe away any dust or
contaminants from surfaces. Allow surface to dry completely
before use.
Availability
CP410 50 Premoistened Wipes
Environmental Impact Data
CFC 0.0%
HCFC 0.0%
CL Solv. 0.0%
VOC 65%
HFC 0.0%
ODP 0.0
CFC, HCFC, CL. SOLV., VOC, and HFC numbers shown are the content by
weight. Ozone depletion potential (ODP) is determined in accordance with the
Montreal Protocol and U.S. Clean Air Act of 1990. The ODP of this product is
zero.
Technical and Application Assistance
Chemtronics provides a technical hotline to answer your
technical and application related questions.
The toll free number is: 1-800-TECH-401.
Note:
This information is believed to be accurate. It is intended for
professional end users having the skills to evaluate and use the
data properly. CHEMTRONICS does not guarantee the
accuracy of the data and assumes no liability in connection
with damages incurred while using it.
Optic Prep
™
Presaturated Wipe
Product# CP410
Compatibility
Optic Prep Presaturated Wipes are generally compatible
with most plastics, glass and metals. As with any chemical
product, component compatibility must be determined on a
non-critical area prior to use. Check compatibility with all
non-glare coatings.
Material
Compatibility
Aluminum
Excellent
Buna-N
Good
CPVC
Excellent
Epoxy
Excellent
Neoprene
Good
Noryl
®
Excellent
Phenolic
Excellent
Cross-Linked PE
Good
Polycarbonate
Good
Polypropylene
Good
Polystyrene
Fair
PVC
Good
Teflon™
Excellent
Tygon™
Good
Viton™
Excellent