Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830 SAFETY DATA SHEET Chemask® Lead-Free SECTION 1: Identification of the substance/mixture and of the company/ undertaking 1.1 Product identifier Product name : Chemask® Lead-Free Product code : CLF8E Product description : Coating. - High temperature peelable temporary mask. Product type : Liquid. Other means of identification : CLF8E 1.
Conforms to Regulation (EC) No.
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830 Chemask® Lead-Free SECTION 2: Hazards identification Annex XVII - Restrictions on the manufacture, placing on the market and use of certain dangerous substances, mixtures and articles : Not applicable. Special packaging requirements Containers to be fitted : Not applicable. with child-resistant fastenings Tactile warning of danger 2.
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830 Chemask® Lead-Free SECTION 4: First aid measures 4.1 Description of first aid measures Eye contact Inhalation Skin contact Ingestion Protection of first-aiders : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention.
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830 Chemask® Lead-Free SECTION 5: Firefighting measures 5.1 Extinguishing media Suitable extinguishing media : Use an extinguishing agent suitable for the surrounding fire. Unsuitable extinguishing media : None known. 5.
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830 Chemask® Lead-Free SECTION 6: Accidental release measures 6.4 Reference to other sections : See Section 1 for emergency contact information. See Section 8 for information on appropriate personal protective equipment. See Section 13 for additional waste treatment information. SECTION 7: Handling and storage The information in this section contains generic advice and guidance.
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830 Chemask® Lead-Free SECTION 8: Exposure controls/personal protection Product/ingredient name methanol Recommended monitoring procedures Exposure limit values EU OEL (Europe, 12/2009). Absorbed through skin. Notes: list of indicative occupational exposure limit values TWA: 260 mg/m³ 8 hours. TWA: 200 ppm 8 hours.
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830 Chemask® Lead-Free SECTION 8: Exposure controls/personal protection Respiratory protection Environmental exposure controls : Based on the hazard and potential for exposure, select a respirator that meets the appropriate standard or certification. Respirators must be used according to a respiratory protection program to ensure proper fitting, training, and other important aspects of use.
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830 Chemask® Lead-Free SECTION 10: Stability and reactivity 10.5 Incompatible materials : Reactive or incompatible with the following materials: Strong oxidizing materials 10.6 Hazardous decomposition products : Under normal conditions of storage and use, hazardous decomposition products should not be produced. SECTION 11: Toxicological information 11.
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830 Chemask® Lead-Free SECTION 11: Toxicological information Product/ingredient name Category Route of exposure methanol zinc bis(dibutyldithiocarbamate) Category 1 Category 3 Not determined Not applicable. ammonia Category 3 Not applicable. Target organs Not determined Respiratory tract irritation Respiratory tract irritation Specific target organ toxicity (repeated exposure) Not available.
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830 Chemask® Lead-Free SECTION 11: Toxicological information Carcinogenicity : No known significant effects or critical hazards. Mutagenicity : No known significant effects or critical hazards. Teratogenicity : No known significant effects or critical hazards. Developmental effects : No known significant effects or critical hazards.
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830 Chemask® Lead-Free SECTION 13: Disposal considerations Hazardous waste : The classification of the product may meet the criteria for a hazardous waste. Packaging Methods of disposal : The generation of waste should be avoided or minimised wherever possible. Waste packaging should be recycled. Incineration or landfill should only be considered when recycling is not feasible.
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830 Chemask® Lead-Free SECTION 15: Regulatory information Ozone depleting substances (1005/2009/EU) Not listed. Prior Informed Consent (PIC) (649/2012/EU) Not listed. Seveso Directive This product is controlled under the Seveso Directive.
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830 Chemask® Lead-Free SECTION 16: Other information Indicates information that has changed from previously issued version. Abbreviations and : ATE = Acute Toxicity Estimate CLP = Classification, Labelling and Packaging Regulation [Regulation (EC) No.
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830 Chemask® Lead-Free SECTION 16: Other information To the best of our knowledge, the information contained herein is accurate. However, neither the abovenamed supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user.
