Datasheet

FW2190Liquid
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
4/23/2018
EN (English)
3/7
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling
:
Ensure good ventilation of the work station. Wear personal protective equipment.
Hygiene measures
:
Do not eat, drink or smoke when using this product. Always wash hands after handling the
product.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions
:
Store in a well-ventilated place.
7.3. Specific end use(s)
No additional information available
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
1-methoxy-2-propanol (107-98-2)
EU
Local name
1-Methoxypropanol-2
EU
IOELV TWA (mg/m³)
375 mg/m³
EU
IOELV TWA (ppm)
100 ppm
EU
IOELV STEL (mg/m³)
568 mg/m³
EU
IOELV STEL (ppm)
150 ppm
EU
Notes
Skin
EU
Regulatory reference
COMMISSION DIRECTIVE 2000/39/EC
United Kingdom
Local name
1-Methoxypropan-2-ol
United Kingdom
WEL TWA (mg/m³)
375 mg/m³
United Kingdom
WEL TWA (ppm)
100 ppm
United Kingdom
WEL STEL (mg/m³)
560 mg/m³
United Kingdom
WEL STEL (ppm)
150 ppm
United Kingdom
Remark (WEL)
Sk (Can be absorbed through the skin. The assigned
substances are those for which there are concerns
that dermal absorption will lead to systemic toxicity)
United Kingdom
Regulatory reference
EH40. HSE
propan-2-ol (67-63-0)
United Kingdom
Local name
Propan-2-ol
United Kingdom
WEL TWA (mg/m³)
999 mg/m³
United Kingdom
WEL TWA (ppm)
400 ppm
United Kingdom
WEL STEL (mg/m³)
1250 mg/m³
United Kingdom
WEL STEL (ppm)
500 ppm
United Kingdom
Regulatory reference
EH40. HSE
8.2. Exposure controls
Appropriate engineering controls:
Ensure good ventilation of the work station.
Hand protection:
Chemical-resistant protective gloves (EN 374). Suitable materials for short-term contact or splashes (recommended: at least protection index 2,
corresponding to > 30 minutes permeation time as per EN 374): Isobutylene-isoprene rubber (IIR; ≥ 0,5 mm thickness) Suitable materials for longer,
direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time as per EN 374): Isobutylene-isoprene rubber
(IIR; ≥ 0,5 mm thickness). This information is based on literature references and on information provided by glove manufacturers, or is derived by
analogy with similar substances. Please note that in practice the working life of chemical-resistant protective gloves may be considerably shorter
than the permeation time determined in accordance with EN 374 as a result of the many influencing factors (e.g. temperature). If signs of wear and
tear are noticed then the gloves should be replaced.
Eye protection:
Safety glasses
Skin and body protection:
Wear suitable protective clothing
Respiratory protection:
Provide local exhaust or general room ventilation to minimize mist and/or vapour concentrations. In case of insufficient ventilation, wear suitable
respiratory equipment. Gas mask with filter type A