Datasheet

ManualsBrandsChemtronics ManualsDesolderingDesoldering Braids 1.5 m 0.8 mm White

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU)

2015/830

Soder-Wick® No Clean SD

SECTION 6: Accidental release measures

6.2 Environmental

precautions

Move containers from spill area. Approach the release from upwind. Prevent entry

into sewers, water courses, basements or confined areas. Vacuum or sweep up

material and place in a designated, labelled waste container. Dispose of via a

licensed waste disposal contractor.

Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains

and sewers. Inform the relevant authorities if the product has caused environmental

pollution (sewers, waterways, soil or air). Water polluting material. May be harmful

to the environment if released in large quantities. Collect spillage.

Large spill

Move containers from spill area. Vacuum or sweep up material and place in a

designated, labelled waste container. Dispose of via a licensed waste disposal

contractor.

Small spill

6.3 Methods and material for containment and cleaning up

For emergency responders

6.4 Reference to other

sections

See Section 1 for emergency contact information.

See Section 8 for information on appropriate personal protective equipment.

See Section 13 for additional waste treatment information.

If specialised clothing is required to deal with the spillage, take note of any

information in Section 8 on suitable and unsuitable materials. See also the

information in "For non-emergency personnel".

Keep container tightly closed and sealed until ready for use.

SECTION 7: Handling and storage

The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should be

consulted for any available use-specific information provided in the Exposure Scenario(s).

7.1 Precautions for safe handling

Protective measures

Advice on general

occupational hygiene

7.2 Conditions for safe storage, including any incompatibilities

7.3 Specific end use(s)

Recommendations

Industrial sector specific

solutions

Not available.

Put on appropriate personal protective equipment (see Section 8). Do not ingest.

Avoid contact with eyes, skin and clothing. Avoid release to the environment. Keep

in the original container or an approved alternative made from a compatible material,

kept tightly closed when not in use. Empty containers retain product residue and

can be hazardous. Do not reuse container.

Eating, drinking and smoking should be prohibited in areas where this material is

handled, stored and processed. Workers should wash hands and face before

eating, drinking and smoking. Remove contaminated clothing and protective

equipment before entering eating areas. See also Section 8 for additional

information on hygiene measures.

Seveso Directive - Reporting thresholds (in tonnes)

Danger criteria