Datasheet

TECHNICAL Data Sheet
8125 Cobb Center Drive • Kennesaw, GA 30152
1-770-424-4888 •
www.chemtronics.com
Rev. C (5/19) Page 5 of
5
Swabs:
21050ESD
36060ESD
41050ESD
44070ESD
48040ESD
51121ESD
Particle Counts:
0.5 - 1 um
755
685
571
1,867
797
3,463
1.0 - 2 um
97
189
96
336
230
1,605
2.0 – 5 um
20
58
37
71
66
206
5.0 – 10 um
7
30
31
31
24
29
10 – 25 um
13
19
19
15
11
14
Over 25 um
3
9
9
2
2
23
TOTAL
895
990
762
2,322
1,130
5,340
NVR (ug/swab)
none
none
none
none
none
Chlorides (ug/swab)
2
none
1
0.21
none
3
ESD Handles - Blue
ESD Handles - Clear
Surface Resistivity
10
10
ohms/sq
10
10
ohms/sq
Material
Polypropylene / Static Dissipative
Copolymer Blend
ABS / Static Dissipative
Copolymer Blend
Note:
This information is believed to be accurate. It is intended for
professional end users having
the skills to evaluate and use
the data properly. CHEMTRONICS does not guarantee the
accuracy of the data and assumes no liability in connection
with damages incurred while using it.
Chemtronics
 is a registered trademark of Chemtronics. All rights
reserved.
Coventry and Aqua-Prime are trademarks of
Chemtronics.
All rights reserved.
Technical and Application Assistance
Chemtronics provides a technical hotline to answer your
technical and application related questions.
The toll free
number is: 1-800-TECH-401
ESD Swabs - Sample Test Data
The swabs were tested by Particle Measurement Technology. All the swabs tests were done using the recommended practices of the
Institute of Environmental Science, Swabs and Wipes Working Group.
The ESD handles do not contain silicone, amides, or static dissipative coatings. The proprietary copolymer blend is not humidity dependent.
The handles have excellent chemical compatibility, even in acetone.