CLS-1445 Series Spinner Flask Instruction Manual Chemglass Life Sciences 3800 North Mill Road Vineland, NJ 08360 USA Phone: 800-843-1794 Email: customer-service@cglifesciences.com Web address: www.cglifesciences.com Rev.
CLS-1445 Series Spinner Flask Instruction Manual Description: The Chemglass Life Sciences spinner systems are designed for long life, high efficiency and low maintenance. Spinners are the ideal environment for culturing a wide variety of cell cultures such as insect cells, hybridomas and many other suspension adapted cells.
Operating and Assembly Instructions: The cap and magnet assemblies are shipped partially assembled. Glass Rod Installation (refer to Figure 1): Remove the magnet from the magnet holder by pushing the magnet through the holder until free. Insert the glass shaft into the hole in the bottom of the magnet holder and re-install the magnet.
Magnet Assembly Installation (refer to Figures 2 & 3): Loosen the cap nut from the cap but do not completely remove. For easier installation, moisten the glass shaft with water and gently slide it through the cap assembly from the bottom through compression fitting body and then hand tighten the cap nut loosely to hold the magnet assembly in place.
100mL, 250mL & 500mL Spinners [5] CLS-1445 Spinner Manual CG Life Sciences
1L & 3L Spinners [6] CLS-1445 Spinner Manual CG Life Sciences
Cleaning: Use a commercial cleanser approved for glass. Chemglass Life Sciences recommends item number CLS-4752, 7X™ and 7X-O-Matic® cleaning solutions. Rinse all glassware as soon as possible after use. To decontaminate ware, autoclave contaminated items in water containing cleanser. Disassemble spinner assemblies, compression fittings and paddle assemblies for cleaning and to avoid the trapping of disinfectants and cleansers.
Return Authorization: CGLS must authorize any return of material. Please contact a customer service representative at the correspondence listed below to obtain a Return Merchandise Authorization (RMA) number. The purchaser is responsible for all packing and shipping to CGLS.
