SDS

SAFEGUARDS (PERSONNEL):
Wear safety goggles. Ventilate spill area.
INITIAL CONTAINMENT:
Absorb spills with inert material.
LARGE SPILLS PROCEDURE:
Keep unnecessary and unprotected personnel from entering. Absorb spill with inert material (e g, dry sand or earth),
then place in a chemical waste container.
SMALL SPILLS PROCEDURE:
Absorb spills with inert material.
7. HANDLING AND STORAGE
HANDLING (PERSONNEL):
Use with adequate ventilation. Avoid contact with eyes, skin, and clothing.
HANDLING (PHYSICAL ASPECTS):
Provide appropriate ventilation. Avoid extreme temperatures.
STORAGE PRECAUTIONS:
Store in a well ventilated place. Avoid extreme temperatures.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
EYE / FACE PROTECTION REQUIREMENTS:
Wear safety glasses.
SKIN PROTECTION REQUIREMENTS:
Wash hands thoroughly after handling. For brief contact, normal work attire should be sufficient.
EXPOSURE GUIDELINES:
1-methoxy-2-propanol
OSHA TWA: 100 ppm, 360 mg/m^3
OSHA STEL: 150 ppm
Dipropylene glycol monomethyl ether
OSHA PEL: 100 ppm, 600 mg/m^3
9. PHYSICAL AND CHEMICAL PROPERTIES
FORM: Aerosol
COLOR: Light Amber
ODOR: Slight
BOILING POINT: >100 F
SOLUBILITY IN WATER: soluble
SPECIFIC GRAVITY: 1.012 (Water = 1)
PH: 7 - 8.2
% VOLATILES: 97 %
10. STABILITY AND REACTIVITY
Stain Extinguisher - Aerosol
RTN Number: 00000044
Page 3 of 6
May 11, 2017