Use and Care Manual

9
Milkmade Non-Dairy Milk Maker
TROUBLESHOOTING
Error Code Problem Solution
Indicator light will not
turn on
Power cord is not
properly plugged in
Make sure the power
cord is completely
plugged in
Display panel
malfunction
Contact customer
service
Indicator light is on, but
the machine does not
function properly
No program selected Select a program
The water reservoir
is either empty or not
adequately filled
Fill the water reservoir
to the appropriate
water level and place
the reservoir in its
correct position
Temperature sensor or
water level electrode
malfunction
Contact customer
service
The grinding chamber
does not intake water
Water pump damaged
Contact customer
service
Water reservoir filter is
blocked
Clean the filter at the
bottom of the water
reservoir
The motor runs
continuously without
pausing
Water has seeped into
the machine
Contact customer
service
The machine is
overheating
Temperature sensor
damaged
Contact customer
service
Buttons don’t work
System is not fully
reset after brief power
disruption
Disconnect the power
for two minutes before
powering back on
Display panel button
malfunction
Contact customer
service