User Manual

9
10
RJ38-2LM RJ38-2LM
Troubleshooting Guide
Problem Possible Cause Solution
The Air Fryer is not
working/will not turn on.
1. Air Fryer is not properly
plugged in.
2. The timer has not been
turned past 0.
3. The basket is not fully
pushed into place.
1. Ensure that the plug is properly
secured in wall outlet.
2. Turn the timer dial past 0 to
initiate cooking.
3. Use the basket handle to push
basket firmly into Air Fryer’s
housing.
There is smoke coming
out of the Air Fryer.
1. Air Fryer is being used
for the first time.
2. There is either too much
grease in or on the food
being air fried.
3. There is leftover grease in
the basket.
1. Smoke will subside after first
use.
2. Lightly coat food with oil.
3. Clean the basket after every
use.
Air fried foods are not
crispy.
1. The food didn’t have
enough oil.
2. The food was coated in
too much oil and became
soggy.
Only toss oil-free fresh foods in a
small amount of oil to achieve the
maximum crispiness.
Cleaning & Maintenance
• Ensure the Air Fryer is unplugged and cool before cleaning.
• Once the Air Fryer and basket are cool, remove the basket from the Air Fryer (if it is
not already removed). Use the tray handle to remove tray. Use a sponge and warm,
soapy water to wash the inside and outside of the basket and tray. Warning: Do not
use abrasive cleaning agents or scouring pads.
• The basket and the tray are top-rack dishwasher safe.
• Gently wipe down exterior with a damp cloth or paper towel.
• Never immerse the Air Fryer or its plug in water or any other liquid.
• Dry all parts thoroughly before storage.
• Store the Air Fryer in a cool, dry place.
Notes