User Guide

USA
6
AFTER SALES SUPPORT
888-315-6553 [e-mail] MODEL: RJ16-LOCKMODEL: RJ16-LOCK
Operating Instructions (cont'd)
ABOUT THE AUTO SHUT-OFF FEATURE
The auto shut-off feature operates when the power cord is plugged in but the
container is empty of water. If the dispenser has been shut off automatically, unplug
the power cord from the eletrical outlet and wait for the Hot Water Pot to cool, and
then add water.
DISPENSING WATER
RE-BOILING WATER
When the dispenser is in Keep Warm Mode, use the Reboil button to boil the water.
The boil light will illuminate once pressed.
•Once the water has re-boiled, the Keep Warm light will illuminate.
•Before boiling, ensure the water level is above the refill mark in water window.
• The re-boil function will be deactivated immediately after the water has finished
a re-boil cycle.
LOCK MODE
1. Press Lock button to activate Lock Mode and indicator light will turn on.
Lock Mode deactivates and locks both Auto Dispense buttons and Reboil button.
2. To deactivate Lock Mode, simply press Lock button again. This reactivates
the Auto Dispense buttons and Reboil button. When Lock Mode is activated, the
Keep Warm and Reboil indicator lights will be off.
Note: If you open and close the lid while the unit is on (even in Lock Mode), the unit will continue to function without
any change just as when the lid is closed. It will not automatically shut off and the function indicator lights will not
turn on or off.
WHEN NOT IN USE
Unplug the dispenser and detach the lid and pour out any remaining water.
NOTE: Empty the container at least once a day. Water left in the container can cause
unpleasant odor and accumulation of mineral deposits.
WARNING: To avoid serious burns, always detach the lid before pouring out the hot water.
Do not allow water to splash onto the operation panel, hinge, handle or power supply plug.
Dispense water manually
Dispense water by pressing the
dispense button on the control panel
Dispense water using the
electric spout button