Use and Care Manual

10
BEFORE FIRST USE
1. Remove all packaging and materials. Be sure that all parts are
included before discarding any packaging.
2. Pull out the power cord from the compartment under the base so
that it can sit level, and place the base on a at surface.
3. To clean the pot of any packing debris, “brew” a pot of plain water
without tea. To do so, lift out the lid, then ll the kettle with water to
the MAX line.
4. Replace the lid, place the kettle back on the base unit, and plug it
into a power outlet.
5. The kettle should default to the Boil preset; if not, use arrow buttons
to set it to Boil, then press START. The LED indicator lights will turn
red and the display will show the average live temperature as the
water heats.
6. After the boil, the unit will automatically switch to Keep Warm, and
the LED indicator lights will be green. Empty the kettle, then rinse it
with clean water. It is now ready for use. NOTE: Never ll with water
above the MAX line or below the MIN line indicated on the viewing
window.
OPERATING INSTRUCTIONS