User Guide

6
RJ14-4-GB
BEFORE FIRST USE
1. Read all instructions and follow them carefully.
2. Remove all packing materials and stickers from the inside and outside of the Coffee Maker.
Gently wipe down exterior with a damp cloth or paper towel. Never immerse the Coffee
Maker, its base, cord or plug in water or any other liquids. The electrical connections must
never come into contact with water or any other liquids.
3. Press the lid release button and pull lid up to remove. (See Figure 1.)
4. Twist the grind basket to the right and lift to remove. (See Figure 2.)
5. Remove coffee filter by using the coffee filter’s handle to lift up and unsnap.
(See Figure 3.)
6. Wash all removable parts, except for the lid, with a sponge and warm, soapy water. Rinse
lid with water. Dry completely.
7. To reattach parts: A) Position the grind basket over the grind basket holder on a 45 degree
angle with the blade portion positioned in the back. Push the basket into the grind basket
holder; turn to the left to lock into place. Note: The Coffee Maker will not work if the grind
basket is not properly locked in place. B) Insert the coffee filter by positioning the coffee
filter’s handle toward the front of the Coffee Maker. Use the coffee filter’s handle to place
coffee filter into the back of the grind basket. Push down to snap into place. C) Close the
lid by placing the water pump spout into the hole on the right of the grind basket. Hold the
lid release button and push down until the lid is securely in place. (See Figure 4.)
8. Before brewing coffee for the first time, use the instructions below to brew a full, 4-cup
carafe of hot water with NO coffee beans or grounds. This will prime the Coffee Maker for
use and clean out any dust that may have accumulated before use.
OPERATING INSTRUCTIONS
(Figure 1) (Figure 2) (Figure 3)
(Figure 4)