User Guide

5
RJ07-M-SS
BEFORE FIRST USE
Before using your fryer for the first time, wash pot and basket thoroughly with warm, soapy
water, carefully dry pot to maintain the good aesthetic appearance.Do not use fryer without
oil or fat. Fryer will be severely damaged if heated dry.This fryer has a thermal safety device.
In case of thermostat failure, the electrical circuit has an automatic cut-out, thus preventing
overheating. Should the fryer leak, do not use. Return it to the place of purchase. To ensure
safe operation, excessive food or utensils must not be inserted into the fryer.
ASSEMBLING THE FRYER BASKETS HANDLES
1. Squeeze handle prongs together and slip the handle prong wings through the handle prong
wing slots.
2. Pull handle back toward you squeezing and rotating slightly from one side to the other to
lock the handle prongs into place.
Note: To remove handle for cleaning and storage simply reverse the process.
CAUTION: ALWAYS CHECK BASKET HANDLES TO ENSURE THAT THE HANDLES ARE
SECURED BEFORE COOKING WITH HOT OIL. THIS WILL HELP PREVENT AGAINST
PERSONAL INJURY.
HOW TO USE
1. Unfold the wire mesh basket handle, squeeze the tines of the handle together and allow
fitting into the basket bracket.
2. Pour between 0.8-1.0 liters of oil into the fryer. The level of oil must be between the two
marks marked, MAX & MIN on the wall of the vessel.
IMPORTANT SAFETY WARNING: Always ensure the correct amount of oil is in the fryer before
switching the power on. The heating element will become overheated and cause risk of oil fire
if you do not follow this instruction.
Handle
Prongs
Handle
Prongs
Wings
Handle
Prongs
Wings
Slots
OPERATING INSTRUCTIONS